can i iron nylon?

Answer 1

no-nylon melts!

Answer 2

I'd say no unless you use a pressing cloth between the nylon and the iron. Use the lowest setting possible. Another thing you can try is steam. Iv'e hung nylon curtains in the bathroom and turned on the hot shower for a few minutes. Worked like a charm.

Answer 3

If you HAVE to iron nylon, put the nylon on the ironing board and then put a towel over the nylon and iron the towel. That way you don't have to worry about it melting so much.

Answer 4

Only if you have the iron on a low setting and a cotton press cloth inbetween, or one of those nifty "iron shape" covers you put on your iron so that you don't have the iron directly touching the nylon.

Answer 5

Most items made from nylon can be machine washed and tumble dried at low temperatures. Use warm water and add a fabric softener to the final rinse cycle.
Remove articles from dryer as soon as tumbling cycle is completed.
If ironing is required, use warm iron. (For specific care instructions, refer to garment's sewn-in care label.)

Answer 6

From my very small understanding of Chemistry, I do believe Nylons melts, so no.

Answer 7

No! Turn on a hot shower and hang the item in the bathroom (not actually in the shower though) and the steam will get the wrinkles out. Or, spray the item with a fine mist from a water bottle.

Answer 8

in case you're able to desire to iron nylon or the different skinny man made that could soften, you are able to placed it under a towel and then iron the towel, to maintain it from touching the nice and comfortable iron. and pass the iron quickly, so the warmth would not get centred. you are able to attempt the soaking in water in case you desire to be somewhat secure.

Answer 9

nylon should not need ironihg. Hang it up after washing and let it drip dry.

Answer 10

You can try, but normally no, the iron is too hot and makes a mess of it.