And what is the method of bleeding the line?
2006-07-16 07:50:13 · 2 answers · asked by mrknositall 6 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
clutch reservoir is on the same side as the master cylinder but closer to the fire wall and is usually black. What you have to do to bleed the system is really quite easy, all you have to do is jack up the car and down on the pass side of the trans, right about where your feet of the passenger is but underneath you will find a slave cylinder on this slave cylinder there is a bleeder just like for doing brakes, have someone pump the clutch 3 or 4 times and then hold the peddle down and then open the bleeder and keep doing it till all of the air is gone, but make sure you don't empty the reservoir.
2006-07-16 12:03:49 · answer #1 · answered by handyman 4 · 0⤊ 0⤋
Location may be near where the Master cylinder is 4 ur brakes, its usally a small round container w/ a cap.
2006-07-16 16:48:35 · answer #2 · answered by Mike D 1 · 0⤊ 0⤋