The door is very tight also in moving .Its upper hindges are broken and it is a massonery work as today the hindges have come out of the wall fixing the door. I will be happy if door becomes smooth and noise less .
2006-07-16 00:43:15 · 13 answers · asked by deepak57 7 in Home & Garden ➔ Maintenance & Repairs
you may try some talc, on clean hinges
,but it sounds to me, that the poor old door ,
needs some drastic repair work, to get it to
work again noiselessly .
a good carpenter/ door expert, needs to fix it .
Good luck with your door ,
2006-07-16 01:10:38 · answer #1 · answered by sweet-cookie 6 · 14⤊ 3⤋
Since the hinges have come out, I suggest you fix the hinges before anything else. Later, try applying a coat of lubricant, like oil, on the surface of the hinges. However, if the hinges that you're going to fix are brand new, you could skip the lubricating step.
Hope that helped!
2006-07-16 07:50:23 · answer #2 · answered by Anonymous · 0⤊ 0⤋
try sanding down the back of the door where you place the hinges and making the door smaller do it dont slam or make much difference if the hinges become lose try making new holes or using caps for your screws then use WD40 to apply a one off lubricant to make the hinges work much better without much noise
2006-07-16 08:15:35 · answer #3 · answered by Dan M 1 · 0⤊ 0⤋
get a can of WD-40 and spray it on the hinges. That should fix it. If you don't want to buy the WD-40, you could use vegetable oil for the same results. :)
2006-07-16 07:47:01 · answer #4 · answered by UniqueIsWhoSheIs 5 · 0⤊ 0⤋
replace the screws with longer ones & oil the hinges, if u have vasileane just wipe it on the hinges, sometimes house settle & the doors will need planed or cut down, good luck
2006-07-16 07:49:03 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Use WD-40 spray on the hinges.
2006-07-16 07:47:02 · answer #6 · answered by prosperous_lunatic 3 · 0⤊ 0⤋
Pour a little baby oil over the squeeking. I't works like a charm. Just make sure you have a towel handy to wipe as you pour.
2006-07-16 07:46:50 · answer #7 · answered by Anonymous · 0⤊ 0⤋
Don't know what exactly you are referring to???
Spray some WD-40 Lubricant on it. Should clear up the noise!
2006-07-16 07:47:34 · answer #8 · answered by jennifersuem 7 · 0⤊ 0⤋
spill oil to hinges of door
2006-07-16 07:50:17 · answer #9 · answered by Anonymous · 0⤊ 0⤋
10-W spray it.
I used Chap Stick on my car door. It worked great.
Try alittle oil.
Get a mans handy hand to work on it,
Make him a pie. ;-)
2006-07-16 07:53:17 · answer #10 · answered by elliebear 7 · 0⤊ 0⤋
oil the hinges.... or maybe it sounds as if you need to remove it all together and start over
2006-07-16 08:27:50 · answer #11 · answered by susie g 2 · 0⤊ 0⤋