what is the "heat index" and how is it calculated?

Answer 1

"The Heat Index uses the temperature and the relative humidity to determine how hot the air actually "feels". When humidity is low, the apparent temperature will be lower than the air temperature, since perspiration evaporates rapidly to cool the body. However, when the humidity is high (ie. the air is saturated with water vapour) the apparent temperature "feels" higher than the actual air temperature, because perspiration evaporates more slowly." *

This link will take you to a goverment site that shows a heat index chart: http://www.crh.noaa.gov/ilx/heat.php

And here's a site where you can put in the temperature and the relative humidity and it will give you the heat index: http://html.channel4000.com/sh/idi/weather/calculators/heat-index.html

And here's the actual formula:
Heat index (HI), or apparent temperature (AI) = -42.379 + 2.04901523(Tf) + 10.14333127(RH) - 0.22475541(Tf)(RH) - ((6.83783 x 10-3)(Tf2) - ((5.481717 x 10-2)(RH2) + ((1.22874 x 10-3)(Tf2)(RH)) + ((8.5282 x 10-4)(Tf)(RH2)) - ((1.99 x 10-6)(Tf2)(RH2)) **

Answer 2

The Heat index (HI) is an index that combines air temperature and relative humidity to determine an apparent temperature — how hot it actually feels. The human body normally cools itself by perspiration, or sweating, in which the water in the sweat evaporates and carries heat away from the body. However, when the relative humidity is high, the evaporation rate of the water is reduced. This means heat is removed from the body at a lower rate, causing it to retain more heat than it would in dry air. Measurements have been taken based on subjective descriptions of how hot subjects feel for a given temperature and humidity, allowing an index to be made which corresponds a temperature and humidity combination to a higher temperature in dry air.

At high temperatures, the level of relative humidity needed to make the Heat Index higher than the actual temperature is lower than at cooler temperatures. For example, at 80 °F (approximately 27 °C), the heat index will agree with the actual temperature if the relative humidity is 45%, but at 110 °F (roughly 43 °C), any relative-humidity reading above 17% will make the Heat Index higher than 110 °F. Humidity is deemed not to raise the apparent temperature at all if the actual temperature is below approximately 68 °F (20 °C) — essentially the same temperature colder than which wind chill is thought to commence.

As relative humidity increases, however, first haze and ultimately thicker cloud cover must develop, reducing the amount of direct sunlight reaching the surface; thus there is an inverse relationship between maximum potential temperature and maximum potential relative humidity, therefore making, say, a simultaneous temperature of 120 °F (50 °C) and 90% relative humidity physically impossible. Because of this factor, it was believed that the highest heat-index reading actually attainable anywhere on Earth is approximately 160 °F (70 °C) in the shade that is 172 °F (78 °C) in the sun. However, in Dhahran, Saudi Arabia on July 8, 2003, the dewpoint was 95 °F (35 °C) while the actual temperature was 108 °F (42 °C) giving it a relative humidity of 67%. The heat index at that time was 176 °F (80° C) in the shade and 191 °F (88 °C) in the sun. This is a full 16 °F (10 °C) higher than what was believed to be the highest heat index possible on Earth.[1]

A good example of the difference between heat index and true temperature would be comparing the climates of New Orleans, Louisiana and Bakersfield, California. New Orleans has lower heat temperatures due to being closer to the Gulf of Mexico, yet the city has a higher heat index because it is a humid heat. Likewise, while Bakersfield actually has hotter daytime temperatures, Bakersfield has a dry heat, so it doesn't feel as hot.

Sometimes the heat index and the wind chill factor are denoted collectively by the single terms "apparent temperature" or "relative outdoor temperature".

A typical measurement in the United Kingdom in the hottest areas in the hottest type of weather generally has temperatures that can get above about 90 °F (32 °C) in the shade with 50% humidity which on the humidex chart is 104 °F (40 °C) in the shade and 119 °F (48 °C) in the sun. You should note that humidex and heat indexes are taken in the shade and not the sun; so extra care must be taken while in the sun! For the record, temperatures reached 101.3 °F (38.5 °C) in Kent in mid August 2003 which is the national record; assuming that this was 50% humidity; it would have a humidex of 126 °F (52 °C) in the shade and 140 °F (60 °C) in the sun. Of course in such extreme heat, the likelihood is that the humidity fell and the humidex was not quite that high.

For more info see http://en.wikipedia.org/wiki/Heat_index

Answer 3

go to link below and put in heat index

Answer 4

It's calculated by using this formula:

(AI) = -42.379 + 2.04901523(Tf) + 10.14333127(RH) - 0.22475541(Tf)(RH) - ((6.83783 x 10-3)(Tf2) - ((5.481717 x 10-2)(RH2) + ((1.22874 x 10-3)(Tf2)(RH)) + ((8.5282 x 10-4)(Tf)(RH2)) - ((1.99 x 10-6)(Tf2)(RH2))

No kidding. It's heat and moisture = heat index.

Answer 5

GO TO THIS SITE BELOW IT WILL EXPLAIN EVERYTHING. GOOD LUCK!!!!