How can I get my laptop to connect to my belkin wireless network?

Question

My laptop is a dell inspiron 1300 (i know, cheap) but i have connected it to my network wireless server before from the same position relative to the transmitter.
When i search for nearby servers my laptop says i may have had my wireless switch turned off.
The thing is, I don't have a switch. I have tried to connect while my other PC was online and offline but no difference - can you help me?

The belkin adsl modem server has one cable connection to my PC. It is plugged in, switched on and works with other laptops.

Answer 1

press and hold "FN" ( between the ctl and windows key) and the f2 key, you should see a radio tower on the screen, if it shows a circle cross, then do it again
if that doesnt work then leave it on and open the dell wlan config tool, and uncheck the box that says somthing like: "let dell wlan thingy mannage my wireless connections

*EDIT* the fn+f2 key is dells universal "wireless power switch" and some dell's dont have them labled, but I guarantee you that it is the said combination, also unless windows is set to "manage my wireless connections" it will always think the wireless is off, however SP2 does tell you that it isn't in control.if dell's quick set has been disabled, or not installed, this may not work, and you will need to go into the "connections " page and turn it on manually.

Answer 2

If your dell has a internal wireless network card do this:

There is a function button (“Fn” in blue most probably) on your laptop keyboard. Find that button and one of the keys from F1 to F12 with a wireless tower sign on it. Press the function and the designated F1-F12 key to activate or deactivate the internal wirelss card.

Also, make sure that your internal wireless (or any wireless card you have) is not been disabled. This is how you can check. (this will differ slightly in how you have your operating system setup)

Start> settings> control panel> network connection and check that your wireless network card is enabled. If it is disabled, right click on it and say enable.

Answer 3

well i have a belkin wireless router and its brilliant..
this is how i do.. turn ur wireless on ur pc by going to either on the task bar on the botton right corner or by going to network connection on the desktop or start- setting.. anyways turn that on well enable it then it will search for networks within the reach of ur pc.. by then you should have ur belkin thing connected.. to the phone line once its connected you will a little msg on the bottom right corner saying its connected and will show the signal strength... and then on ur internet browser type this in http://192.168.2.1/ it will take it to ur belkins setting from there you can put a password on so other people doesnt connect to ur belkin... by using a wizard u can connect to ur broadband settings i.e the user name and password u use to connect to internet.. and there u have it.. there are info about this on belkins website..

Answer 4

I even have talk talk, there cyber web connection does drop each now after which they say its whilst they are updating their traces. yet in addition there is yet another component, on my belkin router there became a menu on the genuinely set up internet site on your modem called IDLE TIME, this must be set to 0 OR 999 (minutes), no be counted if it extremely is desperate to something it capacity the modem will automaticaly disconnect from the internet after that particular volume of time if no one is using it. To get to this menu form on your modems ip, or whether you get onto the important set up internet site, like as an occasion a Belkins modems set up internet site is 192.168.2.a million after which you will possibly desire to flow onto the menu "Connection form"!!

Answer 5

1. Make sure you turn on your Wi-Fi.

2. There is a small switch . . .

3. Read your manual.

(wink) ~ have a nice day!

Answer 6

get a wireless router!