2006-07-13 09:06:19 · 7 answers · asked by David H 1 in Cars & Transportation ➔ Car Makes ➔ Mercury
usually the manual will have a proceedure to reset it. Usually Disconnecting the battery, then turning the inginition to on, then off will reset it. Keep in mind however that if the condition that caused the problem is still there it will com right back on.
2006-07-13 09:10:43 · answer #1 · answered by Briggs 3 · 0⤊ 0⤋
If you disconnect the battery for about a minute it will reset the codes. However, if the problem that caused the light to come on has not been repaired, it will come back on.
2006-07-15 14:14:58 · answer #2 · answered by spikeslady 2 · 0⤊ 0⤋
Unhook the battery for 1 min, this will reset the entire van.
2006-07-13 23:30:15 · answer #3 · answered by Josh S 7 · 0⤊ 0⤋
Disconnect the battery for a minute then the computer will clear itself.
2006-07-13 18:51:38 · answer #4 · answered by kayef57 5 · 0⤊ 0⤋
go to auto zone and they will run a check and delete the codes.
2006-07-13 16:12:07 · answer #5 · answered by markski037 3 · 0⤊ 0⤋
disconnect the battery and conect it again
2006-07-13 16:12:36 · answer #6 · answered by chqusmc 2 · 0⤊ 0⤋
take it to the dealer
2006-07-13 16:09:20 · answer #7 · answered by bobsled 5 · 0⤊ 0⤋