"I come to this site for HELP not assholes". I know my spelling is Bad so don't say anything,
I got fuel to all the combustion cheamber's but the bike won't idel. Now my qustion is #2 spark plug has a weak spark and or no spark. can i trim the wire back a bit, To get the Screw in more wire?
2006-07-12 07:44:30 · 5 answers · asked by Anonymous in Cars & Transportation ➔ Motorcycles
http://www.sohc4.us/forums/index.php
Ask here, someone will have one.
yes you can cut wires back about quarter inch so plug caps fit better.
Its more likely to be an idle system blockage in carb though
2006-07-12 18:58:33 · answer #1 · answered by 1crazypj 5 · 0⤊ 0⤋
-Yes, you can trim the wire. Just make sure they're long enough after doing so. Cutting the wires won't change any resistance specs.
-Switch the condensors between the points to rule them out.
-Check the points for pitting (clean up with "flex stone") and adjust them and the timing. Check that the advancer moves freely (as long as you'er in there).
-Switch the coils around. Connect the 1/4 points to the 2/3 coil & vice versa to help diagnose for an electrical problem.
-If the bike runs but won't idel, remove the carbs and check the pilot jets.
2006-07-12 15:55:34 · answer #2 · answered by guardrailjim 7 · 0⤊ 0⤋
In other words, the dichhead Edward is like a chick, nothing to say but still must say something.
Is that bike old enough for the spark plug wires to have cracked? Replacement may be the way to go.
2006-07-12 17:46:18 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Your spelling isn't nearly as bad as your English. No you don't want to trim the wire. I am not 100% sure what to tell you. I would take it to a mechanic.
2006-07-12 14:49:21 · answer #4 · answered by Mike Hunt 5 · 0⤊ 0⤋
YOU get carbon build up.... Change them out only way....You may need plugs also....It's best to do it all at same time..Thank you. And points...
2006-07-12 14:48:41 · answer #5 · answered by pitterpatter47 5 · 0⤊ 0⤋