English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

My problem is that I'm not getting any spark. I have changed the modulator, the rotor, the distributor cap, all the wires and plugs about 2 weeks ago. The van was running great until about 3 days ago, it was hard to crank but it did turn over. The next mourning I got nothing. It has been raining alot here lately, could this be the source of my problem. Please help!

2006-07-12 03:05:38 · 3 answers · asked by irishwilson43 1 in Cars & Transportation Car Makes Chevrolet

3 answers

Check your coil and the power wire running to it. If there is no power getting to the coil it is probably something like your ignition switch, providing that all the fuses are good. Hope I have been helpful.

2006-07-12 03:35:42 · answer #1 · answered by king_davis13 7 · 3 0

Water would be a factor with a no start or no spark. 1st check the fuse box panel. Remove the red 10 amp fuse and look for any water or condensation. You may need to clean and dry out the fuse panel real good if you find any signs of dampness. You may need to look inside the distributor cap again and look for water there too. Clean and dry out all parts. If still no spark, you may have a bad ECM, (computer).
Good Luck

2006-07-12 03:13:12 · answer #2 · answered by mailbox1024 7 · 0 0

Try the easiest thing first - replace the spark plugs again. You may just have gotten a bad one.

Also - battery? alternator? Could be a general electrical problem. One of the first things I do when it appears to be electrically related is try another battery.

2006-07-13 06:23:20 · answer #3 · answered by Phoenix, Wise Guru 7 · 0 0

fedest.com, questions and answers