i changed the winshield wiper switch.still it does not work.power is going to the windshield wiper motor-at all wires.my car is a 93 mercury sable;could it be the post module that goes to the wiper motor?why won`t my wipers work?
2006-07-11 12:02:22 · 8 answers · asked by gumby7k 2 in Cars & Transportation ➔ Maintenance & Repairs
Sounds like your Wiper Relay is burnt out. I had this same issue once before.
2006-07-11 13:54:08 · answer #1 · answered by daango26 2 · 1⤊ 0⤋
HAHAHAHAHHAHA!! Thats me!!!! :-) I can change the oil in my car in about 15 minutes, but I have SUCH a problem with those snap on windshield wiper blades! I don't know why.. it's SO frustrating! I have to get help from my little brother.. it's embarrassing! :-) ** how did you know of my shame!
2016-03-27 01:40:00 · answer #2 · answered by Anonymous · 0⤊ 0⤋
if you have 12 volts at the plug for the motor add a ground wire from one of the mounting bolts to a good ground should fix
2006-07-11 14:57:08 · answer #3 · answered by babywolff1@sbcglobal.net 2 · 0⤊ 0⤋
Sounds like a loose grounding wire (You measured voltage at the motor?).
2006-07-11 14:10:44 · answer #4 · answered by butch 5 · 0⤊ 0⤋
where are the ground wires? Motor is supposed to ground with frame.
2014-12-01 15:24:51 · answer #5 · answered by Thorn 2 · 0⤊ 0⤋
Actuator switch on the steering column can be bad or if you have delay wipe the timing relay could be bad.
2006-07-11 12:11:06 · answer #6 · answered by Jack C 1 · 0⤊ 0⤋
check ground wires
2006-07-11 16:57:47 · answer #7 · answered by racingirlsmokesem 2 · 0⤊ 0⤋
Try your fuses!
2006-07-11 12:05:17 · answer #8 · answered by dmspartan2000 5 · 0⤊ 0⤋