English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

what's the cheapest/most effective way of increasing preformance of my 15yr old 1.8litre diesel pug205?
I know that increased pressure/volume/coldness of air intake should theorectically increase acceleration with fully open throttle - but what gives substantial differences? any other recommendations?

2006-07-11 10:45:17 · 10 answers · asked by kevo 2 in Cars & Transportation Maintenance & Repairs

10 answers

Part exchange it for summat decent.

2006-07-11 10:52:01 · answer #1 · answered by Anonymous · 0 0

Performance = power:weight.
Less weight, same power = better performance.
Taking stuff out is always cheaper than adding things - make it lighter.
When did you last change the air filter? If it's clogged it'll be running rich which won't help.
New injectors alone probably won't help too much, as you'll then have to increase airflow to get the mixture right, then upgrade the exhaust to get rid of the burn gas....
Given the age of it, I'm not sure there's much you can do.

2006-07-12 07:30:57 · answer #2 · answered by td 1 · 0 0

It's an old diseasel. You're pretty much stuck with it as it is. If you want a faster car, buy a faster car. For what it'll cost to get more out of the Pug, it makes more sense, and you probably haven't given a thought to the suspension and brakes, which are probably at their limits with the power it's got.

2006-07-11 10:51:52 · answer #3 · answered by Darren R 5 · 0 0

spoiler and body kit take some weight off the carand bit more costumising the car that my way of chepest/effective way of increasing the car preformance

2006-07-17 22:17:59 · answer #4 · answered by Anonymous · 0 0

anything you can do to either .. air in.. air out.. fuel in, will increase performance... buy a better air filter.. k&n... bigger exhaust... if it was a petrol.. you could have used shell optimax.. that gives much better performance.. also, keep you engine/injectors spotlessly clean by buying a diesel engine cleaner additive... dont need to do spark plugs.. as diesels dont have them....

2006-07-11 21:50:54 · answer #5 · answered by paulrb8 7 · 0 0

go to the junk yard and try to find a D19T engine, it was made for volvo, but will fit. It is turbo, but when you change the engine, clean out the turbo. Or you could change your injectors, and change your exaust.

2006-07-11 10:57:43 · answer #6 · answered by johncowboy69 2 · 0 0

Take some weight out of the vehicle?

2006-07-11 10:50:07 · answer #7 · answered by PTP 4 · 0 0

what you say is true , but with an engine that old / mls you will prob blow the bt end , clutch will slip , brakes will be **** , get a car that you need

2006-07-11 12:06:39 · answer #8 · answered by bitsinbobs 2 · 0 0

Replace your old spark plugs and wires.

2006-07-11 13:58:43 · answer #9 · answered by daango26 2 · 0 0

new fuel injectors

2006-07-11 10:49:55 · answer #10 · answered by Anonymous · 0 0

fedest.com, questions and answers