English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

6 answers

Sounds to me like the noise your describing would best be called a "growl" ---- like driving over rumble strips. If that's the case, then I'd suspect front wheel bearings. However, noises are difficult to describe. One thing you can do to help narrow it down --- does the noise change in pitch and intensity when you turn or weave the vehicle from side to side? If so, then it would be a good bet that the wheel bearings are failing. Also, does it change when you apply or let off the gas? If so, this would be more of an indicator that a differential bearing is going bad. Hopes this helps, it's the best I can do on the limited info.

2006-07-11 10:34:04 · answer #1 · answered by helomechsmitty 2 · 0 0

Its okay it`ll only cost about 350 bucks to repair,don't worry too much grand marquis`s are good cars they have excellent mechanics,just like its GM twin the ford crown Victoria.

2006-07-11 10:19:33 · answer #2 · answered by Anonymous · 0 0

Get your CV boots, Cv joints, and axles checked. This about the age of a car that needs these parts replaced, and the starting costs will be around $300.

2006-07-11 10:16:29 · answer #3 · answered by Anonymous · 0 0

don't check the CV shafts because you don't have those on a rear wheel drive car...if the sounds changes Along with the speed of the car then is something in the drive line....start with the easy things first....there usually cheaper....tires, out of round, broken belt, bent rim....then the suspension, check shocks and springs...then in the drive shaft..u joints and then the brakes...good luck

2006-07-11 11:12:32 · answer #4 · answered by blueman2 5 · 0 0

Sounds like you need to have your wheel bearings replaced.

2006-07-11 14:01:46 · answer #5 · answered by daango26 2 · 0 0

one of your tires might be out of balance.

2006-07-11 10:16:41 · answer #6 · answered by lightningviper 4 · 0 0

fedest.com, questions and answers