i switched out the 305 for a crate 350 and dont know where it goes
2006-07-11 09:31:09 · 5 answers · asked by smotpoker40444 1 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
You have two different answers, and depending on the year of the 350 block, they could both be right. Older 350 blocks, especially truck blocks, had the oil pressure switch mounted near the oil filter on the mounting plate for the filter. This read oil pressure coming directly out of the filter. Later models moved it to the back of the intake manifold on the drivers side next to the distributor, this reads oil pressure from the passage that feeds the rear of the camshaft.
2006-07-13 10:52:36 · answer #1 · answered by unclejimthebear 3 · 1⤊ 0⤋
At the back of the manifold 3" passed the distributor on the top
righthand side on the engine block if you are standing in front of
the rad
2006-07-11 16:49:38 · answer #2 · answered by chevyman 3 · 0⤊ 0⤋
its all according what year but it is in the same place as the 350 right behind the intake on the back of the block
2006-07-17 10:48:14 · answer #3 · answered by Todd 1 · 0⤊ 0⤋
looking at the motor from the front, it should be at the rear of the motor just behind the intake manifold next to the distributor. you may have to get an adapter because its supposed to screw into the block.
2006-07-11 22:58:33 · answer #4 · answered by dabeermann82 2 · 0⤊ 0⤋
it should be near the oil filter mounting area.
2006-07-11 16:34:56 · answer #5 · answered by hjbergel 5 · 0⤊ 0⤋