My AEROBED looses air slowly and I can't find any obvious leak. Any ideas on how to repair it?

Question

There is no obvious puncture and I don't hear any air escaping. I'm thinking maybe it's the seal around the pump, but really I have no idea. Is it a total loss?

Thanks.

Answer 1

unfortunately air beds seem to have a bad habit of weakening at the seams very hard to detect and harder to fix i used soapy washcloth and ran it over seams the ones at the pillow end seem 3 outta 3 to be the culprits i ended up with very small bubbles but that's all it took patching didn't work because of the fold the one bed took to silicone fairly well but always peeled away under strain cant patch it when full because it blows patch away and everything else i tried either ate the vinyl or peeled away i just gave up and bought a foam mattress

Answer 2

When I have a leak that I can't find I put liquid soap mixed with a little water in a spray bottle. I then spay the entire surface of the item with the leak. If there is a leak the soap/water mixture will bubble! Use vinyl patch kit to fix.

Answer 3

flow to the community ironmongery shop and purchase a minimum of two cans of Krylon H20 or Acrylic spray paint. Use a minimum of three cans for a queen sized mattress. go with a colour to examine the colour of the mattress itself. The Krylon H20 paint could be used indoors on an identical time as the Acrylic must be used outdoors or in a properly ventilated section (storage, patio, outdoors...). If employing the Acrylic spray paint, deflate your Aero Air mattress and flow it into an area the place you will no longer breath the fumes. as quickly as the mattress is in a 'paintable section', inflate it to close to finished or finished means. Spray the finished mattress, surprisingly the seams and the backside of the mattress. enable it dry a minimum of two hours. Spray it a 2nd time and enable it dry a minimum of six hours or in one day in case you are able to flow devoid of the mattress that long. Deflate and return it on your mattress room and inflate lower back on your needed firmness. Make the mattress as you generally could. Your mattress ought to now final you yet another 9 to a minimum of 12 months decrease than established use.

Answer 4

If you have access to a pool, try finding the leak in there. Soapy water works well too, that is what tire changers use to find holes in your tires.
If not, call the company or email them & get their opinion. It may be the pump, & it may be at the outflow flange.

Answer 5

fixaflat

Answer 6

duct tape, "if you cant Duck it, chuck it!"