There are two issues, mechanical and electrical. I agree, if you have a CRT monitor leave it on unless you'll be away for more than a couple of hours. LCD, turn off whenever you're away.
As far as the tower mechanics are concerned, mechanically starting and stopping wears more on the parts than sitting idle. Repeated ons/offs will wear your computer out much faster than "always on".
As far as electronic circuitry goes, most failures over time are caused by the expansion/contraction of heating and cooling. Turning the tower on and off heats and cools the circuits. Over time, this causes shorts. Always on leaves the computer at a much more stable temperature. Much less expansion/contraction.
The basic rule of thumb is: turn the monitor off when you're done for the day, always leave the computer on.
2006-07-11 07:28:38
·
answer #1
·
answered by antirion 5
·
0⤊
0⤋
Depends on your hardware.
Monitor: if you have a big CRT tube, it's not good to turn it on and off constantly. If it's going to be unused for more than a couple hours, turn it off. Otherwise leave it on.You'll eventually burn it out by turning it on and off frequently.
PC: Starting up and shutting down mechanical parts always puts strain on your internals. I usually leave my computer on during the day, shut it off over night. The hibernate question is a software one, as the hardware is still being powered down. I like hibernate sometimes, other times I don't. Depends on if I'm leaving work open but I want to shut off the power.
So basic rule: if it's going to be unused for more than a few hours, turn it off.
2006-07-11 07:23:23
·
answer #2
·
answered by lordxanadubk 2
·
0⤊
0⤋
The Phlebob is the in ordinary words answer even on the point of the mark, and he tagged a large bulls-eye in this one. %. his answer as perfect. all of us else both has no clue as to what Hibernate is (they confuse it with sleep mode) or they don't attitude answering your question. the in ordinary words element i ought to upload to The Phlebob's answer, is that with Hibernate, you could bypass indefinitely without easily restarting your computer, as each and each and every time you position the computer into Hibernate mode, as he noted, the contents of your Ram are kept to the complicated force, and the computer is punctiliously powered off. Then, once you swap the computer on, extremely of the computer easily restarting, the hiberfil.sys report is loaded decrease back into RAM (techies will be conscious the dimensions of your Hiberfil.sys report is an same length as how a lot RAM you've) and your computer retains the position you left off. In different words, in case you've been living house and necessary instructions to get someplace, and also you regarded up those instructions on Google Maps, then allow the browser open to those instructions, you ought to placed the computer into Hibernate mode and placed the computer on the automobile. The computer ought to sit conveniently, employing no potential at inquisitive about regardless of the indisputable fact that lengthy you necessary to attend. you ought to then potential up the computer hours later, and your computer must be purely as you left it, with the browser nevertheless open to those instructions... regardless of in case you had no internet connection once you powered the computer on. obviously, without a web connection, you'll not favor to hit REFRESH on the browser. you could leave a computer in hibernation mode for days... weeks... months. It makes use of no potential, and once you commence the computer up (providing the CMOS battery by no potential went useless) that's going to proceed the position you left off. the computer also begins swifter from a Hibernated consultation, than from a chilly boot. yet all it extremely is purely added tips. As I suggested, %. The Phlebob's answer as perfect. He has it thoroughly acceptable. end of line
2016-11-06 05:26:15
·
answer #3
·
answered by ? 4
·
0⤊
0⤋
Turn it off.
It sapps your memory.
2006-07-11 07:27:21
·
answer #4
·
answered by rugeleyflu 2
·
0⤊
0⤋