Is there a special tool to release the fuel filter on my 2001 Ford Escape?

Question

It has an in-line filter and appears to have quick release hoses on either side. Has anybody ever used this tool and will the fuel pour out of the line when I disconnect it?

How much do you suppose one of these special tools cost?

Answer 1

You can use a pair of pliers to release the fittings. You can also rent a tool from AutoZone.

Good Luck

The circular set is called " AC/ Fuel Line Disconnect Tool Set " part # 37000, you can purchase it at O'Reilly auto parts store. AutoZone will have the tool also but different part number.

Answer 2

I had a Ford Ranger that was a 2000...and if they are similar then yes. I can't remember what the tool is called, but it is a plastic ring that slides over the fuel line and into the clip that holds the filter in place. The tool is cheap, its part of a set, and can be found at any autoparts store. Just tell them you need a fuel filter tool set. That is what I did.

Answer 3

you cannot use pliers don't do it the only way to get them off is a fuel line disconnect tool i use a metal one i bought at auto zone you can get the plastic ones when using push the hoses together and twist the tool all the way in than pull apart it may take a few tries we call theses quick connects they are not quick disconnects is far as will fuel leak out yep to minimize only pull first hose 1\2 way off than do 2ND also relieve pressure in the line there is a thing on the fuel rail that looks like a tire valve push the button to relive fuel press

Answer 4

some cases. greater effective than likekly your could have a white plastic clip on the tip of each and every line. Simlpy take a flat blade screw driving force and pry the clips off. do this on the two facets of the filter out. warning take a great rag and place it over the filter out end, on a similar time as pulling on the line. gasoline stress is severe some cases and ought to injure your eyes. So be careful. to place it lower back in first alingn the recent clips interior the ends of the hose's so as that they seat completely, the way they loked whilst they have been initially fastened on the previous filter out. Now placed the filter out in that is seat and push the lines in untill you hear or sense a click. and you're achieved. Now placed the main interior the vehicle and cycle it countless cases without commencing the vehicle. this could build gasoline stress and your vehicle will start up precise away. Else you in basic terms will crank the vehicle little longer than customary, for some seconds. the single you'll want a gadget for is those that have a metallic braded line, without white plastic clips. On those you'll want a plastic insert, which you are able to purchase at your nearby vehicle factors for a bout 5$. you will purchase a kit that has 6 of theese, in in distinctive hues. you will could desire to apply between the smallest one.. the grey or the or the gentle blue one. reckoning on which or how extensive your gasoline line is. The trick to doing this line, is to insert the gadget on the line, then sliding it tricky in to the coupling. as quickly as the gadget is completely seated "can no longer push in not greater" then push the line in, in the direction of the gadget. as quickly as you push the line in then pull it lower back. it may take some time to get it precise, how ever don,t provide up. could desire to time is using the seals interior the line being alittle dry and that they replace right into slightly confusing to cut up. properly as quickly as you pull them off, placed your new fillter interior the cradle, shop a watch in the way it is going "filter out orientation" and then push the lines in untill you hear a click. determine they click in as a results of fact in the event that they dont, the gasoline presure will push them aside and you will have a considerable gasoline leak ok. your achieved.. desire this helps. Will.