I have a 2002 Chevy Impala, 3400 V6, 3.4L. Can you tell me where the A/C Blower motor resistor is located and is it hard to replace?
2006-07-09 17:38:18 · 3 answers · asked by joe b 1 in Cars & Transportation ➔ Maintenance & Repairs
its under the dash by the blower motor, Here is the replacement procedure,
BLOWER MOTOR RESISTOR ASSEMBLY REPLACEMENT
REMOVAL PROCEDURE
1. Remove the right side instrument panel insulator.
2. Disconnect the electrical connector from the blower motor resistor.
3. Disconnect the electrical connector from the blower motor. IMPORTANT: The blower motor resistor opening is slotted. Access is extremely limited.
4. Loosen both screws to the forward blower motor resistor.
5. Remove the rear screw to the blower motor resistor.
6. Remove the blower motor resistor.
INSTALLATION PROCEDURE
IMPORTANT: Align the blower motor control processor forward retaining slots onto screws and seat the blower motor control processor against the HVAC module.
1. Install the blower motor resistor. NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the rear screw to the blower motor resistor. Tighten Tighten all screws to 1.5 N.m (13 lb in) .
3. Connect the electrical connector to the blower motor.
4. Connect the electrical connector to the blower motor resistor.
5. Install the right side instrument panel insulator.
here is the parts and labor costs
Part OEM Part Price
Blower Motor Resistor
Resistor 15304891 $26.09 Notes
Contact dealer for most current part and price information.
Labor Skill
Level Mfg.
Warranty Standard
Blower Motor Resistor
Replace B 0.3 0.4 Notes
All are quotes from http://www.alldata.com
2006-07-09 19:57:00 · answer #1 · answered by Magikmann 4 · 3⤊ 2⤋
1988 Ford E350 camper
2016-04-09 07:06:09 · answer #2 · answered by thomas p 1 · 0⤊ 0⤋
should be under the hood near the a/c by the firewall
2006-07-09 17:51:33 · answer #3 · answered by tenthirty_two 2 · 0⤊ 0⤋