English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

2006-07-09 16:13:46 · 9 answers · asked by stillsmokin_420_936 1 in Home & Garden Do It Yourself (DIY)

i mean the breaker box on the pole outside

2006-07-09 16:40:13 · update #1

9 answers

Each city, county and state have different requirements. You need to check with your local building codes department to determine their minimum requirements.

To determine the size electrical service that you need, you need to do a load calculation. The trailer manufacturer has already done this for you.

NEC article 550.11(D) states "Electrical Nameplates. A metal nameplate on the outside adjacent to the feeder assembly entrance shall read:

THIS CONNECTION FOR 120/240-VOLT, 3-POLE, 4-WIRE, 60 HERTZ, ___________ AMPERE SUPPLY

The correct ampere rating shall be marked in the blank space."

Find your electrical panel and go outside to find this nameplate. The minimum ampere rating is marked here.

If you need further assistance, please visit -
http://electricalblog.gilchrist-electric.com

2006-07-09 16:53:01 · answer #1 · answered by gilchristelectric 3 · 0 0

150 amp service is recommended. This is enough to run everything. Its not expensive . But dont use less or you will have problems. 220 is needed for dryers but that is a 220 receptacle. 150 Amp Fuse in a braker box is all that is necessary for a trailer.

2006-07-09 16:22:30 · answer #2 · answered by soeur_deux_de_ny2005 3 · 0 0

You need a 220 breaker switch. All volts from the pole to your trailer is 220v.

2006-07-18 06:35:35 · answer #3 · answered by Anonymous · 0 0

A single family dwelling is required to have a 200 amp service

2006-07-09 16:18:28 · answer #4 · answered by lifeisgood 4 · 0 0

200 amps for 220v connection. Don't forget the secondary ground to your trailer frame (required by many electric co's).

2006-07-09 16:19:09 · answer #5 · answered by Michael Myklin 3 · 0 0

The absolute minimum for any dwelling is 100 amps.

2006-07-10 15:00:29 · answer #6 · answered by electric_bob58 1 · 0 0

220 amps

2006-07-18 08:41:55 · answer #7 · answered by jyd9999 6 · 0 0

See the Gilchrist Electric answer. They are correct.

2006-07-21 16:52:00 · answer #8 · answered by gr8alarmguy 4 · 0 0

go with gilcrist 100000000 % right

2006-07-21 18:44:52 · answer #9 · answered by aldo 6 · 0 0

fedest.com, questions and answers