2006-07-09 14:39:10 · 7 answers · asked by jfk 1 in Cars & Transportation ➔ Maintenance & Repairs
If you purchase the trailor connector from your local autoparts store. The wiring diagram for the trailor hook-up will be on or in the package.
The whole process is easy with a good kit.
You will need to get under the rear of the bed and look up near the taillight to locate the wiring harness. Follow the wiring directions for color code of wires.
The most common problem with trailor wiring is a poor ground connection. Drill a screw hole in the frame clean of paint and dirt and firmly connect your ground wire.
Yours: Grumpy
2006-07-09 14:42:10 · answer #1 · answered by Grumpy 6 · 0⤊ 0⤋
2000 Ford Ranger Wiring Diagram
2016-11-16 21:15:47 · answer #2 · answered by ? 4 · 0⤊ 0⤋
This Site Might Help You.
RE:
how do you wire trailer harness on ford ranger?
2015-08-18 10:53:25 · answer #3 · answered by Ethelda 1 · 0⤊ 0⤋
After you get the harness & connect the white-yellow-brown-& green wires YOU should put an EXTRA ground on the pig tail-Grounds are a main problem on trailer lights--ALSO if you have an [Automatic Transmission] make sure YOU install a EXTRA Transmission COOLER !White is ground-BROWN is running lights-green & yellow are right & left stop & turnsignal signal wires.
2006-07-09 14:55:36 · answer #4 · answered by Anonymous · 1⤊ 0⤋
You should be able to buy a kit that has plugs that go to your taillight wires. Real easy to install.
Personally, though, I wouldn't bother. The Ranger will probably burn out the tranny when you pull a trailer with it. Get synthetic oil in the trans as soon as you can.
2006-07-09 14:45:58 · answer #5 · answered by auntiegrav 6 · 1⤊ 0⤋
get a tester for your wires and have someone to hold your break or use something to pres your break pedal there is wires under you bead you can take your tester and push it through the cover of the wirer and when the lite comes on you have your break lites for trailer then put your left signal on and do the same for the left and your hazard lites
2006-07-09 14:58:29 · answer #6 · answered by johnny h 1 · 0⤊ 0⤋
depends on the year of the ranger. 90 or newer they make a harness. Older you have to splice the wire.
2006-07-09 14:50:23 · answer #7 · answered by Anonymous · 0⤊ 0⤋
models 1986-1992 T-connector #15314
models 1993-1999 T-connector #15325
models 2000-2003 T-connector #15344
Plug it in & go
2006-07-13 22:16:24 · answer #8 · answered by extremehitch@verizon.net 3 · 0⤊ 0⤋
My '98 has a plug in connector. You can get one at the Ford parts department.
2006-07-09 15:16:49 · answer #9 · answered by Rockvillerich 5 · 0⤊ 0⤋
take it to u-haul
2006-07-09 14:43:19 · answer #10 · answered by jyd9999 6 · 0⤊ 0⤋