Hi Pooh Bear
"Hertz" (hz) is a measure of frequency. 1 hertz is equal to one cycle per second (eg one full vibration per second, one full revolution per second, etc).
In Mhz (megahertz) the "mega" is the standard SI prefix meaning "one million". So 1 Mhz is 1 million hertz = 1 million cycles per second.
SI prefixes greater than 1 go like this:
* deka = 10
* hecto = 100
* kilo = 1000
* mega = 1000 000
* giga = 1000 000 000
* tera = 1000 000 000 000
* peta = 1000 000 000 000 000
etc
From this table, 1 gigahertz (Ghz) = 1000 000 000 hz = 1000Mhz.
Hope this helps!
The Chicken
2006-07-09 11:30:09
·
answer #1
·
answered by Magic Chicken 3
·
0⤊
0⤋
Responders have correctly discussed the units involved, so I'll contribute a few words about the technology.
Frequency is measured by a gated electronic counter. The gate is opened for a precise amount of time (say, one second), and the individual oscillations of the source are counted until the gate is again closed. The count is displayed on a digital readout. Depending on the frequency to be measured, instruments to do this cost from a few hundred dollars to many thousands.
2006-07-10 04:40:01
·
answer #2
·
answered by Anonymous
·
0⤊
0⤋
Plug a ic (intergrated circuit) chip up to a cathoid ray osilascope and measure the frequency. Set the range until you can see a wave. The most basic is a sign wave but more often used are square and sawtooth (triangle waves).
You can work out the frequency by 1 over time, or rather how many waves pass per second.
For example, these chips work on two voltages such as 5v and 2.3v for a cmos chip and we know them as binary one's and zero's.
Basic digital electronics with boolean algabra and an understanding of logic gates.
The six main ones are.
And.
Or.
Nand.
Ex-or.
Ex-nor.
Not.
The only mathamatical formula that works for these is from an 18th century IRISH mathamatican.
Without Boolean, none of the worlds digital electronics would work.
2006-07-09 18:49:03
·
answer #3
·
answered by eireblood2 4
·
0⤊
0⤋
Mhz is a metric unit of measure and so it goes in units or ten so 1000 hz is a khz and 1000000hz or 1000 khz is equlivent to 1mhz and 1000000000hz or 1000 Mhz is a Ghz. and so on The units are kilo mega giga and even goes higher to tera pico and so on.
2006-07-09 18:37:27
·
answer #4
·
answered by Dwayne K 2
·
0⤊
0⤋
well the frequency is pretty well handled..lets talk about the actual measurement of the field itself.
the instrumentation i measured radio-frequency fields with turned the frequency into heat by thermocouples, and the minute heat changes became the measurement.
the only people in the world that made a measurement device was the NARDA corporation: and yes, there equipment was sky high.
2006-07-10 08:52:06
·
answer #5
·
answered by centurion613 3
·
0⤊
0⤋
Ghz is measured in Ghz.... e.g. 10Ghz = 10,000,000,000Hz.
1 Hz = 1 cycle per second. Imagine a sine wave with a period of exactly 1 second. A 10Mhz signal will have 10,000,000 waves in 1 second, i.e. 10,000,000 'peaks' in that time span.
2006-07-09 18:35:38
·
answer #6
·
answered by chrisj14uk 2
·
0⤊
0⤋
1 mhz = 100 hz
1000 mhz = 1 ghz
I believe :)
2006-07-09 20:08:07
·
answer #7
·
answered by spjf69 1
·
0⤊
0⤋
One hertz (Hz) is one cycle per second, so 1MHz (Megahertz) is a million cycles per second, 1GHz (Gigahertz) is a thousand million cycles per second and so on.
2006-07-09 18:33:46
·
answer #8
·
answered by Gavin T 7
·
0⤊
0⤋
nemasisofbull
tell me more r answer is perfect for a question i was plannign to ask
im voting u best answer for sure.
2006-07-09 19:19:56
·
answer #9
·
answered by kevin h 3
·
0⤊
0⤋
1000mhz = 1ghz
2006-07-09 18:30:25
·
answer #10
·
answered by Anonymous
·
0⤊
0⤋