My upstair plugs stopped working in my bathroom.?

Question

I went to plug in my night light and dicscovered that my plugs in both bathrooms have no power yet everything else is in fine working order. I checked my fuse box and everthing is on. I turned them off hoping that might reset them but they remain powerless.

Answer 1

You may have a ground fault circuit interrupter (GFCI) on one or more of your outlets. These outlets have a test and reset button on the receptacle. These circuit breakers prevent electric shock if they ever come in contact with water. It is very easy to trip one by touching the test button, if this is the case just press the reset button. In my home there is one in my kitchen. It runs the kitchen and spare bathroom. So, two or more rooms may be affected by one GFCI. Locate all of your outlets that are affected to see if one is a GFCI. If you don't have a GFCI, thoroughly check any fuses that may be in your fuse box. They can burn out and sometimes it's hard to see. You may want to replace the fuse with a new one just in case. If you have breakers, reset the breaker by turning it off and back on. If that doesn't work on a breaker then it needs to be replaced. Otherwise it could be bad wiring - CALL AN ELECTRICIAN!!

Answer 2

Since you know about fuses, you're probably also smart enough to check for GFI plugs, and reset them if that is the problem.

I'm guessing neither of these are the problems. Thus, turn off your fuses, and unscrew the plate. Then you should be able to pull out the socket set, and examine that.

If there's any burn marks, get a new one, put it in, and try again. If not, WHILE YOU HAVE IT SEPARATED, stick a paperclip in the socket, and use an ohm meter to see if there's any current. You should have a rather low resistance if it's working.

If there doesn't seem to be anything wrong with the socket set, go curse for a while, get a beer, and WITH THE POWER OFF AT THE FUSE BOX, attach the two active ends of the cord together with a wire nut, unplug/turn off anything else that plug's fuse goes to, and go back to the fuse box. You should now be able to use the Ohm meter on either side of the fuse. There should be a pretty low resistance, slightly higher than with the socket set. If not, your wires are broken somewhere in the wall.

It may be possible to fish new wire through the wall to fix your problem, but I'm guessing that... A) it's not a broken wire, and B) if it is a broken wire, fishing the wire through will be more trouble than calling a repair man to do it right.

Answer 3

If the fuses or breakers arew OK, you should then check for special plug-ins with a built in ground fault circuit breaker on them. Their called GFCI plugs, and their required in bathrooms and places where they might get wet. They often link these together, so the plug might look like a regular plug, but its linked to a GFCI in another location (like the garage or laundry room), and that one its linked to is popped off.

They have a test button and a reset button. Look for other dead outlets, and reset all of the GFCIs you find, and I bet you'll get it.

Answer 4

So, you've 2 bathing room receptacles on one breaker and neither of them are operating? First you would possibly want to imagine about what has ensue those days, did it hurricane, did you've any artwork executed the position a nail ought to have come by potential of the wall and punctured the insulation of the twine? I easily have chanced on that as quickly because it storms is a sturdy time for gfci's to bypass undesirable. on your case, i ought to hav to say that each and each and all of us of your bathing room receptacles are stressed at the same time and on the same circuit so if there is yet another bathing room contained in the living house, examine there for a gfci receptacle. any incorrect way is a gfci breaker in which you would purely ought to reset the swap. that is a commonplace breaker with an more suitable button that ought to need to say attempt. make efficient you swap it off.....then on. that is a complicated one often times. OFF, then ON!!! do not propose to be sensible yet you'd be suprised! If there is something plugged in everywhere in any bathing room plug, make efficient you're taking regardless of that is out in the previous or if it retains tripping. also like the first placed up says, take a go searching. often times us electricians make issues complicated and placed those gfi's in wierd places. desire each and everything is going properly and in case you could not discern it out, call a sparky. they're less costly!

Answer 5

Check for GFCI outlets. One of them may have popped, cutting off power to all of them. Make sure the "reset" buttons on all of them are completely pushed in.

Answer 6

Find all the GFI outlets and push the resets . This is usually the problem

Answer 7

you probably have a fuse in your fuse box blown reset your fuse box

Answer 8

check for gfi outlets,,the ones w/ buttons,,,reset them