I just built my pc and it was working fine for a month or so then it started to heat up when ever I ran video games then a week later the the monitor wouldnt read signal I replaced video card and switched pcie slot and replaced monitor it runs under safe mode but still does not read normally What did i do wrong
2006-07-09 06:37:10 · 8 answers · asked by justin v 1 in Computers & Internet ➔ Hardware ➔ Desktops
In Safe mode, change the display resolution to a low value, also the refresh rate of the monitor. (This can be found in Control Panel -> Display -> Settings tab (Refresh rate in advanced option). Restart the machine in normal mode, it should work if your display driver is installed correctly.
2006-07-19 07:51:19 · answer #1 · answered by jay 3 · 0⤊ 0⤋
If it runs in safe mode and no other, then either your drivers are bad or you have set the graphics settings at too high of values for your system to support.
2006-07-09 06:41:58 · answer #2 · answered by Interested Dude 7 · 0⤊ 0⤋
in case your pc got here with living house windows already put in then you definately must have a living house windows restoration CD. there is an chance that you're going to pick to reformat your hardcontinual. yet, you should ascertain if it ought to ward off your records before doing so. contained in the bios, make positive your pc boots from the CDcontinual. next, position the living house windows restoration cd in to the CDcontinual. Now, instead of booting from the hardcontinual, it ought to boot from the CD. 4787509ad9f9d747a81a30e9dde3d4a7ollow the activates and, once in living house windows, locate the records you pick to save and replica them to a CD sparkling or an exterior hardcontinual. upon getting kept your records, you could start to diagnose the issue including your pc. Now, boot your pc back with out the restoration CD. Press [4787509ad9f9d747a81a30e9dde3d4a74787509ad9f9d747a81a30e9dde3d4a7] or in spite of different key you pick to bypass in to secure mode. There should be quite a few ideas accessible on the menu. Scroll down and choose reboot utilising the perfect good configuration. See if this solves the issue. it truly is circumstances like those that a stay CD like BartPE and/or the perfect CD Boot Disk ought to help you. yet, you pick to already have created them before the issue occurs. you could search for those 2 products on Google for better ideas.
2016-11-30 22:33:37 · answer #3 · answered by ? 3 · 0⤊ 0⤋
Have you reinstalled the video card drivers?
2006-07-09 06:43:05 · answer #4 · answered by Weaselll 1 · 0⤊ 0⤋
any chance you have more than one display card (say a graphics card and one built-in) and that you have your monitor connected to one which gets shut down by the other?
2006-07-15 10:38:25 · answer #5 · answered by samsyn 3 · 0⤊ 0⤋
Problem with drivers
2006-07-19 22:39:39 · answer #6 · answered by Anonymous · 0⤊ 0⤋
reinstall the vga driver
2006-07-17 06:00:03 · answer #7 · answered by Anonymous · 0⤊ 0⤋
i think problem is only driver
2006-07-19 23:01:19 · answer #8 · answered by imran i 1 · 0⤊ 0⤋