2006-07-09 03:01:46 · 5 answers · asked by ssears01 2 in Cars & Transportation ➔ Other - Cars & Transportation
You can do that by adjusting the screw on it.
2006-07-09 03:05:01 · answer #1 · answered by Pre lives on 5 · 1⤊ 0⤋
Hold the brakes closed and loosen the cable retaining nut. Take the slack out of the cable and retighten the nut. You can make also make adjustments at the caliper on some brakes by screwing the cable end cup away from the caliper. Some brake levers also have this adjustment. Good luck
2006-07-09 03:08:24 · answer #2 · answered by Rockvillerich 5 · 0⤊ 0⤋
Hand brake you tighten the cable
2006-07-09 03:05:02 · answer #3 · answered by Vulcan 1 5 · 0⤊ 0⤋
Loosen the lock nut on the brake assembly and turn the barrel containing the cable counterclock sensible to attraction to the brakes mutually slightly. too lots will reason a drag you wont like. do not forget approximately to safeguard the locknut while accomplished. that's recommended to alter the pads in the event that they are worn too lots.
2016-12-08 17:31:53 · answer #4 · answered by kadlec 4 · 0⤊ 0⤋
At the handle..adjustment screw cable.
2006-07-09 03:05:45 · answer #5 · answered by Anonymous · 0⤊ 0⤋