Car 1.3, year 1989, carburettor is HMC Von Carburettor
2006-07-09 01:50:34 · 7 answers · asked by paranoidsteve 1 in Cars & Transportation ➔ Maintenance & Repairs
Hi, thanks for help so far. I wondered if anyone knows where the jets are placed. I need to get the car running now and dont have time to buy the manual as I must fix it today!
2006-07-09 02:08:05 · update #1
With a hammer then buy a decent car. Other than that, buy the Haynes manual
2006-07-09 01:52:50 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Generally, unless you are sure about what you are doing, you don't. If it runs at all, start it and run through some carburetor cleaner, that may be enough to fix it.
And to the person who is telling you that you spelled it wrong, no he didn't. Just like colour and centre, Carburettor is the European spelling.
Definitions of 'carburettor' - 1 definition - WordNet
carburettor (n.) mixes air with gasoline vapor prior to explosion
2006-07-22 11:19:01 · answer #2 · answered by oklatom 7 · 0⤊ 0⤋
If you are near North East Scotland I can help you out , if not sorry bud, Clean everything and count all the turns of every screw you remove so you can refit , however I suspect if you need to ask this question you dont have the skills to do this overhaul or even to recognise worn parts when you remove them. Sorry to be so offputting. An after thought , try Redex or Greenex depending on what your car like to drink , you put some down in the carb and some more in the tank and lots of crud comes out the exhaust with lots of smoke , which clears. hope this helps.
2006-07-17 15:35:25 · answer #3 · answered by Paul Sabre 4 · 0⤊ 0⤋
If you don't have time to buy a Haynes manual to work on that carb., don't attempt it; especially if you don't know where the jets are. Take it to somebody qualified. Don't want to sound blunt, but you can REALLY screw them up BAD if you don't have a clue. i cannot tell you, because I've never done one. Now if it was a Rochester, I used to eat, sleep, dream, and sh__ them.
2006-07-22 15:47:14 · answer #4 · answered by Anonymous · 0⤊ 0⤋
The aspects are inexpensive adequate, the labour's the element, so it may likely be a competent theory to have the completed seize kit replaced when you're at it. Plus, it may make a competent promoting element. you should likely damage out with merely the seize plate, yet any shopper properly worth his salt may ask precisely what has been executed.
2016-11-01 12:10:28 · answer #5 · answered by Anonymous · 0⤊ 0⤋
CARBURETTOR IS SPELLED CARBURATOR if you cant spell, you shouldn't be taking apart anything...
2006-07-22 10:34:43 · answer #6 · answered by LEO H 3 · 0⤊ 0⤋
with a screwdriver if that fails **** it one with a hammer
2006-07-09 01:52:25 · answer #7 · answered by Anonymous · 0⤊ 0⤋