On a 1984 Ford F150 two bbr carb. What other parts need to replace on carburetor? Have kit but would like to know if there is anything else that should be done that the kit does not include...
don't mean fuel filter, clean gas tank, or new fuel line or anything else related to fuel system just things that control the carburetor...
2006-07-08 16:21:13 · 5 answers · asked by DeeDee 4 in Cars & Transportation ➔ Maintenance & Repairs
Everything in the kit should be all you need, just remember to set the floats correctly as the directions tell you and after you get it running be sure to adjust your idle mixture screws.
2006-07-08 16:28:53 · answer #1 · answered by mister ss 7 · 4⤊ 2⤋
merely take that guidance to the aspects counter or call forward. If there are any variables they'll inform you. often a rebuild is merely cleansing and new gaskets and drift valve. different aspects might additionally be mandatory even nonetheless. determine your cleansing consists of blowing out with air tension after soaking in solvent.
2016-12-08 17:25:33 · answer #2 · answered by Anonymous · 0⤊ 0⤋
i always change rubber hose connecting gas tank to fuel line has a tendency to rot out . if you have kit that should be enough
2006-07-08 16:26:56 · answer #3 · answered by Joe 5 · 0⤊ 0⤋
strip carb and soak main bits in petrol over night is best then check all mating surfaces to make sure notwarped then use compressed air and clean all holes in upper and lower parts this is easy to over look but very important you must make sure all inlets /outlets breath correctly
2006-07-08 22:07:52 · answer #4 · answered by simonboyington 2 · 0⤊ 0⤋
if the kit didn't come with the float id change it while ur in there.
2006-07-08 16:25:18 · answer #5 · answered by miker6565 3 · 0⤊ 0⤋