When I parked next to my neighbors car, my son threw open the back seat door and put a very small vertical dent in the door panel of my neighbor's black Kia. What can I do?
2006-07-08 08:03:44 · 11 answers · asked by drapper25 2 in Cars & Transportation ➔ Maintenance & Repairs
Create an arson fire within the neighbors car interior, whereas the dent will not even be noticable -or- pay to have it fixed...
2006-07-08 08:06:00 · answer #1 · answered by J. T. N 4 · 1⤊ 4⤋
I have a problem with dents also and have been looking up how to pop them out myself on the net. The most popular suggestion I found is to use a hair drier and a can of air duster. Look it up if you like. First clean the site, heat with a hair drier and immediately shoot it with the air duster while holding the can upside down. This is supposed to cause the metal to freeze and shrink. Metal will pop back into place. I intend to try and use this myself. Might be a good idea to wait for a good warm to hot day. Metal may be more plyable.
2016-03-26 21:45:04 · answer #2 · answered by ? 4 · 0⤊ 0⤋
Depending on how bad it is I would think you could simply take off the inner panel of the door and pop the dent out. But I don't know if it would work. I have heard of people doing it before, but have never done it myself.
2006-07-08 08:06:52 · answer #3 · answered by stepmomster22 3 · 0⤊ 0⤋
Buy a product called pop a dent or replace the panel with a new one.
2006-07-08 08:43:06 · answer #4 · answered by Anonymous · 0⤊ 0⤋
As others have said you need a suction cup or a dent puller but with a puller you must drill a hole and remove door panel. Then you must body fill the hole and sand, primer and match paint with car.
2006-07-08 08:10:35 · answer #5 · answered by rjarobins 2 · 0⤊ 0⤋
pay for the repair. check if there is a paint-less dent remover service in your area. that should cost less then sending it to a body shop. but if it is a dent then you have no other choice then to have it repaired.
if it's just pushed in a little but no rigged edges to the dent then you could use a suction cup dent puller. they sell them at most auto parts stores.
2006-07-08 08:07:13 · answer #6 · answered by cesar g 3 · 0⤊ 0⤋
call the dent doctor they use a freezing method
2006-07-08 08:08:16 · answer #7 · answered by groovyrn34 2 · 0⤊ 0⤋
if the dent is not creased too badly, a swift tug with a hearty suction cup will pop it....
2006-07-08 08:07:38 · answer #8 · answered by nowyermessingwithasonofabitch 4 · 0⤊ 0⤋
get dent-wizard...they are the cheapest and come right to your house or work...no body shop or dealership overhead involved...
2006-07-08 08:07:38 · answer #9 · answered by Anonymous · 0⤊ 0⤋
With a plunger from your bathroom.
2006-07-08 08:07:09 · answer #10 · answered by Teresa Meindl 2 · 0⤊ 0⤋