Why do my light bulbs burn out so fast?

Question

I have incandescent and halogen light bulbs all over my home and they seem to burn out at a very fast rate - I'd say, on average, every two/three months or so. As halogens are rated to last for 2000/3000 hours or more, this doesn't make sense. All bulbs are the right wattage for the lamps they are attached to. What gives?

Answer 1

You seem to have an electrical problem, possibly with your electrical service. I am a Master electrician, I have been doing this sort of thing for 30 years. Call a professional if you do not know how to check this out. Electricity is not something to play with. Call a Professional.

Answer 2

I wonder what do you do in your home with Halogen lamps? Nobody uses halogens for domestic purposes. Either its Incandescent, CFL or Flouroscent tubes. What is the purpose for which you are using halogens? Because of thier use, probably, your wiring is getting heated up. Domestic wiring is not meant for halogen lamps usage. Or you might be using duplicate, cheap qualilty bulbs which have no guarantee. Or basically, your wiring is faulty. These are some of the reasons for your bulbs to burn out.

Answer 3

Your bulbs ought to correctly be burning out right away because of how tightly they have been put in in the previous. there's a brass tab in the socket of your mild that makes a connection with the bottom of your mild bulb. If that tab is compressed the bulb won't be able to make a competent connection. Then there is an electric powered arc it really is created to fill the hollow that over the years can burn a small hollow in the bottom of the bulb breaking the bulbs air-tight seal. Then even as air receives in the bulb it is going to burn out the filament right away causing a short bulb existence. you may opt to analyze that brass tab to make certain if it quite is the reason behind it. inspect the source article decrease than that ought to opt to describe everthing. reliable success!

Answer 4

Things that could REDUCE bulb life:

* A Dirty Bulb (surface heat unevenly)

* Never heating fully or cooling too quickly
(turning off and on too quickly or often)

* Bulb movement or vibrations (can loosen filaments)

* Buying "Store Brand" bulbs without guarantees.

* Spiking Current in your electricity (Bad house current or wireing.

* House Circuits NOT POLARIZED or Grounded properly.

There are many reasons. If the bulb did a real short performance, return it and speak to the manager (don't COMPLAIN, just EXPLAIN)

Good Luck!

Answer 5

your house might be getting voltage fluctuations. do you live out in the country? try some country light bulbs. they're rated for 130 volts instead of 120 volts. or maybe try rough service bulbs. they cost a bit more though

Answer 6

In industrial installations the lights are often dimmed slightly to greatly increase bulb life.

Answer 7

You should buy a wattage tester for your electrical sockets and lamps to see if they're conducting the proper wattage/voltage. It doesn't sound like they are.

You can get a wattage/voltage tester on ebay pretty cheap usually.

Answer 8

Great question. Do you realize the light bulbs in Thomas Edison's house...the ones he designed originally are still working?

Answer 9

some of these answer are hilarious. there are many reasons your bulbs could be burning out faster than average. many conditions to consider too. id suggest you call an electrician to look at it.

Answer 10

Perhaps electrical problems, wiring? Call your local power company, and have them check-this should be a free service.