2006-07-07 17:17:30 · 5 answers · asked by Cindy G 1 in Cars & Transportation ➔ Maintenance & Repairs
lots of work it helps to have a long extion and do it through your wheel wells or from under the car jack it up and put it on stands
to be safe
2006-07-07 17:24:59 · answer #1 · answered by mobile auto repair (mr fix it) 7 · 0⤊ 0⤋
I have done it a couple of times on a 95 3 liter. As I recall, most of the plugs are accessible from the top, but the rear two may have been through the removable cover in the passenger compartment over the back of the engine and front of the trans. I seem to also remember using a couple of extensions with a u-joint in the middle. When I replaced them I also used platinum plugs so as to reduce the future intervals between changing.
2006-07-07 17:35:04 · answer #2 · answered by anonymourati 5 · 0⤊ 0⤋
first; don't use any sparkplugs if you want to do it right get the right ones from the dealer,most ford newer cars will not take any other than motorcraft platinum plugs which in the long run will last longer between sirvices and cuase of the problem to install them without the right tool it's the only way to go.two;just let a pro do it,unless you like to swear,like to get very dirty an even with the tools you not find all of them. this is what I DO !!!
2006-07-07 18:02:37 · answer #3 · answered by srtransmision 2 · 0⤊ 0⤋
replace them with a chevy truck,they come with really good plugs
2006-07-10 17:33:03 · answer #4 · answered by oneemazingplace 3 · 0⤊ 0⤋
unscrew the old ones and then screw in the new ones???
i aint exactly sure wat your question is
2006-07-07 17:26:00 · answer #5 · answered by hillbilly271 3 · 0⤊ 0⤋