English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

2006-07-05 23:05:08 · 7 answers · asked by princess_listy 1 in Computers & Internet Hardware Other - Hardware

7 answers

Ahhh... this is a bit lengthy to go into here. Ultra-simplified version; Buy the parts, put it together. You'll need a screwdriver. That's about it. Of course I've also used a rubber mallet, hacksaw, jigsaw, and drill, but those were all unusual circumstances.

If you really want a step by step you can find one here: http://www.pcmech.com/byopc/

Be forewarned that this will give you the basics, but there's a hundred little things you just have to learn on your own, mostly through trial and error.

2006-07-05 23:09:52 · answer #1 · answered by The Resurrectionist 6 · 0 0

Okay, it can be made in simpler way if you want to. The basic part of a computer is the processor, primary and secondary memory, and input output devices. You can buy these things and put it together. These devices are connected by a system called bus, so you need a motherboad on which you are gone put it togther. Making a computer in this way is called cloning a pc. If you want to make it from the each building blocks then it is also possible, but I think here is not enough space to discuss it all, if you want you can contact me personally for further information. You'll be able to find out about me and my contact information in the link below.

2006-07-06 06:40:42 · answer #2 · answered by ? 5 · 0 0

Get a motherboard, RAM memory chips, a processor with a cooler and a fan, a hard disk, a floppy, cd/dvd drives, a powersource and a box for your computer, a graphic card (optional), a sound card (optional), a netword card (optional), a monitor, a keyboard, speakers and plug it all.

2006-07-06 06:11:15 · answer #3 · answered by aoc10010001100 2 · 0 0

it's very simpel to make a computer here we go
first = purchess the parts as given in list
1. mother board(recom. Intel desktop 945)

2. processor (recom. intel 3.06 HT with 2 mb l2 cache)

3. ram ( at least 512 mb hynex)

4. floppy drive (sony $opt.$ )

5. cd drives (recom. dvd rw samsung, u can use combo drive , cd drive , or u can use a cd writer)

6. hard disk (reco. 80 G. B. sata seagate*)

7. keyboard ( recom. microsoft wireless)

8. Mouse (recom. microsoft wireless)

9. monitor (recom. 17" samsung tft*)

10. cabinet (as u like *)

the above list is nessecory for making a computer
now strat
first open both boxex mother board & processor
fix the processor in mother board . remmeber when u fix the processor on mother board pls make sure tht the cut see on processor slote & the same cut on processor both cut are in a row .
now fix the ram on the m/b* when u fix the ram on the m/b u see two cuts on ram & both cuts on m/b one cut is small & another one is big same thing in ram fix the small cut on small cut on the m/b
must read it scroll down ****
then check the display of the board connect the smps (switch mode power suply comes with cbinet) it has two power connetor which is connetct on m/b one is a big in all connectors & a diffrence connector among them now connect the power in smps & then short the power botton for just a second on m/b (u can find power button on m/b front pannal)
now see the display on monitor here we are sure tht mother board processor & smps is ok &****{ remmeber u can first connect
the monitor power in power swith & it's data cable (blue color) in m/b back pannal (blue color)}

now discconnect the cables or smps attech with m/b
And fix the m/b attech with cpu on cabinet .
and then fix every part we have purchess like hard disk floppy drive dvd writer in his location .
connect the data cables comes with m/b or interface cables m/b to hard disk, m/b to flopy drive m/b to dvd drive

connect the power connectors with every parts
& connect the front pannal in m/b cables comes with cabinet
fix the cabinets external pannals or( windows) & know u assembled the computer . know connect the cables like monitor data cable (blue) keyboard & mouse & it's power cables now turn on the computer . thx & for more detals pls contect

RAJ :- (india) 09828580414

2006-07-06 09:54:01 · answer #4 · answered by raj 2 · 0 0

I found a link which gives you step by step instructions and tips on assembling/ making a PC.

http://www.learnthat.com/courses/computer/buildpc/assemble.shtml
http://en.wikibooks.org/wiki/How_To_Build_A_Computer

hope it helps

2006-07-06 06:15:28 · answer #5 · answered by Devil M 5 · 0 0

u mean how to build a computer ??? if u said how to make a computer then u need lots of transistor and semi-conductor make IC ....and so on

2006-07-06 06:10:29 · answer #6 · answered by maxclark153 3 · 0 0

man bye it from a company

2006-07-06 08:49:48 · answer #7 · answered by VIVEK A 2 · 0 0

fedest.com, questions and answers