how to configured dhcp?explain and give some example?

Question

how to configured dhcp?explain and give some example?

Answer 1

to configure dhcp first install dhcp service on a server then if using windows server 2003 there is a wizard that works fine if you will need to configure a scope a range of IP addresses to be handed out to your clients such as 192.168.1.1 - 192.168.1.254 you will then have to configure a subnetmask 8,16 or 24 bits for class full addressing then configure a default gateway, exclusion ranges, and reservations if you need to along with any other options such as a dns server or WINS then your done activate the scope and authorize the server in AD if you are in a domain.

Answer 2

You need to be more specific as to whether you are setting it up on a router or on computers.

On a router, you need to login to the configuration page (open Internet Explorer, and go to the web address 192.168.0.1 or 192.168.1.1 depending on your router, check you manual) There will be a login page/screen this info you will need to get from your manual or manufacturers website. Then there will be a page in which you can change some options: starting address, subnet mask, enable/disable dhcp, max number of dhcp users or end address, client lease time. As a general rule of thumb you can set the starting address as 192.168.1.2 or 192.168.0.2 depending on which your routers address is. An example and standard subnet mask is 255.255.255.0 The max number of dhcp clients depends on how many nodes you have on the network, in general i would probably take that number and add acouple in case a friend stops by with a computer or something. Your client lease time will depend on the environment, if it will likely be the same computers connecting day-in and day-out, then set it as high as you want. However, if there will be computers coming and going, then set it shorter accordingly.

For setting DHCP on a network card. Windows is factory setup to work with dhcp, and you shouldnt need to change anything. If you want a specific computer to have a specific and consistant ip address, then you want to set a static ip address for the card and then you are set.

Answer 3

Consider the IP address range of 192.168.1.1 - 192.168.1.254. You can use either a server or a router to issue addresses automatically to computers on the same network. The DHCP device (server or router) should have an address that is entered in manually, which could be 192.168.1.1. You could then tell the server to give any other computer that comes on to the network an address automatically. The server asks, "which address?". You could say "give it any address between 192.168.1.2 - 192.168.1.254" (since 192.168.1.1 is already the address of the server). When any other computer is hooked up to the network, the server will GIVE them an address instead of them having to manually assign an address.

Answer 4

For a start up, unload the cd. it fairly is not any longer an invaluable owing to verify the router. Use the counsel superhighway interface technique as interior the instruction manual. in uncomplicated words connect it by way of employing cable to the computing device for configuration. attempt the relationship as quickly as the configuration is finished and shop your settings. Then setup instantaneous with WPA or 128 bit WEP encryption. After this you ought to use the instantaneous card's application to discover your community, set encryption and connect.