I replace the ECU because I find a coolant leak from the heater core and was droping over the ECU, no have signal power is Ok in all the conectors to the MAF,TPS, EGR,Coil pack, some idea Thnx.
2006-07-05 15:44:26 · 2 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
fuses and relays is OK only no have signal to the coil pack
2006-07-05 16:22:14 · update #1
The only way to get rid of glycol (antifreeze) on electronics is to flush thoroughly with water.....THOROUGHLY. So you need to pull the wiring harness plug and flush the heck out of it. Then take some electrical contact cleaner spray and flush the moisture out with that. Then flush the connector on the new ECM because it's contaminated with glycol now. This should fix your problem...just be very thorough and when your done, be sure to get everything dry.
2006-07-05 15:54:34 · answer #1 · answered by jeff s 5 · 0⤊ 0⤋
check fuses to fuel pump,check cam sensor,even fuel pump relay.
2006-07-05 22:50:59 · answer #2 · answered by FORDever 4 · 0⤊ 0⤋