how to hang shelf on lath & plaster wall?

Answer 1

My husband hung a shelf for me on plaster using something called a "toggle bolt" also called a "molly bolt"
It*s kind of a funny looking thing that goes into the plaster and then these little wings spread out and hold the bolt in place.
Just ask at Lowes or Home Depot

Answer 2

Plaster and lath partitions harden extensively by using the years and additionally you will fracture it attempting. So end employing your self loopy drilling as even a masonry bit has a perplexing time in that stuff. They make a super variety of photograph putting structures for basically such partitions. they appear as if buttons with tiny sharp pins on the lower back which you swat with a hammer to set to the wall. you additionally can use 2 section epoxy sticks to stick small blocks to the wall which you would be able to then connect different hangers onto. They promote one type on television yet you ought to purchase it at any homestead grant shop. It is available in a tube and additionally you chop back off slightly, blend along with your palms and follow wall. Use the blue painters tape to hold something you epoxy onto a wall in place on an identical time as the epoxy dries. you additionally can get reliable fulfillment with the Command gadget of peel and stick tags to dangle photos. They artwork on any soft floor and are trouble-free to flow. We use a mixture of all of those on a relatives homestead with concrete block partitions with super fulfillment.

Answer 3

molly bolts

Answer 4

call a professional and stop being so cheap

Answer 5

find the studs