my usb gives error that there is no usb in H:
2006-07-03 03:57:57 · 9 answers · asked by shobit 1 in Computers & Internet ➔ Hardware ➔ Other - Hardware
thats not correct question..
if usb doesnt work then you can check it by right click on my computer and then properties....
then check hardware....then device setups and check all list weather your usb device is or not..
if yes then uninstall it and reinstall it..
if not then rescan for hardware changes on uper little pc icon..
then insert cd and install new driver..
problem is solved.
i think you are asking for card reader...may b ur mmc gone bad
2006-07-03 04:02:07 · answer #1 · answered by gaurav_sam33 2 · 0⤊ 0⤋
It sounds like you plugged a USB 2 device into a pc that only has USB 1 ports.
;-D Sorry. Technology marches on!
2006-07-03 11:02:10 · answer #2 · answered by China Jon 6 · 0⤊ 0⤋
reboot your pc. then insert the USB. flash cards are usually plug and play especially if youre using windows xp. anyway, there are other possibilities like your USB might be damaged.
Note to everyone (who has flash cards and other external storage devices): Before you pull out your devices from the usb port, make sure that you stop the device first. this will prevent your device from getting corrupted. to stop a device, double click on the icon with an arrow at the lower right portion of your desktop.
then just stop the device. a message will appear if its safe to remove your storage device.
2006-07-03 11:02:23 · answer #3 · answered by rydhel1016 3 · 0⤊ 0⤋
maybe the usb port isnt drive H:
or youre usb is non functioning properly...
right click on the drive, and then troubleshoot it
2006-07-03 11:07:29 · answer #4 · answered by Anonymous · 0⤊ 0⤋
uninstall and than reinstall but first install the drivers than insert the usb flash drive
2006-07-03 11:01:16 · answer #5 · answered by Vee 2 · 0⤊ 0⤋
I have to say this question is easy :
Download the USB Drivers on this web:
http://www.about-usb.com/usb-2.0-driver/usb-2.0-driver.htm
And install it !! :)
2006-07-03 11:04:07 · answer #6 · answered by JACK 1 · 0⤊ 0⤋
Here is a link to the mircosoft web site for repair of plugins might do the trick
http://www.microsoft.com/downloads/details.aspx?FamilyID=c680a7b6-e8fa-45c4-a171-1b389cfacdad&displaylang=en
2006-07-03 11:40:57 · answer #7 · answered by retired_afmil 6 · 0⤊ 0⤋
check the connection.
2006-07-03 10:59:32 · answer #8 · answered by Anonymous · 0⤊ 0⤋
change it:D
2006-07-03 11:00:11 · answer #9 · answered by Anonymous · 0⤊ 0⤋