the power led..switch to green and after the msg "no sync" appear..its turn to red..whats wrong??..it is the hard drive not connected properly??or have something disconnected inside the cpu..what is that??
2006-07-03 02:57:46 · 6 answers · asked by tommy 1 in Computers & Internet ➔ Other - Computers
that would indicate that you have no signal to your monitor from your graphics controller. try starting the system in safe mode and see if it works. if you have more than 1 vga connector on your pc, try the other one.
2006-07-03 03:02:32 · answer #1 · answered by Interested Dude 7 · 0⤊ 0⤋
NO sync means that the monitor is not hooked up properly.
The only other problem it could be would be if there has been a hardware change or breakdown - and in most cases its the memory sticks that are at fault. If you've change your memory, try changing it back again. If you haven't touched it, try removing a card and restarting and changing it over for the other one if it works.
2006-07-03 10:06:54 · answer #2 · answered by pratchmg 4 · 0⤊ 0⤋
My guess is your video card has gone over the hill or has worked loose in its slot.
2006-07-03 10:02:03 · answer #3 · answered by ijcoffin 6 · 0⤊ 0⤋
could be the wire from the monitor to the PC..
or your video card...
2006-07-03 10:01:12 · answer #4 · answered by Preykill 5 · 0⤊ 0⤋
Check your video card...it could be something wrong with it....
2006-07-03 10:02:48 · answer #5 · answered by Yoda 2 · 0⤊ 0⤋
check your video connection and your video card,
2006-07-03 10:02:09 · answer #6 · answered by lepactodeloupes 5 · 0⤊ 0⤋