help me im desperate!?

Question

ive got a windows 98 that once had internet explorer and netscape navigator installed on it. since then, the program files for the two have been deleted. now, when i try to install internet explorer, navigator, or mozilla firefox either it doesnt work or it says program.exe could not be found. however, i can do things like use aol instant messenger and play pokerstars.


i neeeeeeeed help!!!!!!!!!!!!!!!!!!!!!!!!!

Answer 1

windows 98 is really out of date and it became one of microsft Histories
and microsoft has no support anymore for that
it mean ,this days this company say u not use it anymore.
so try to forget it
microsft operating systems have problem always
all versions
it's better to use some ,that has a good support
install windows Xp
and forget 98
talking about that and solving it and kill time is not useful for it
u solve this problem today
will have another problem tomarrow

Answer 2

Boot from a Windows 98 cd and try to do a repair or reinstall. You might be able to save the data on your hard drive doing this, but back up everything before you start.

Answer 3

Unfortunately Windows98 had a few bugs when it came to the web browser. I believe you may have one of these. When I contacted Microsoft, they suggested wiping the system HD and reintalling Windows, preferably a newer version like XP (as long as the processor can handle it) Sorry.

Answer 4

Sorry to tell ya that windows 98 is pretty outdated and you are going to have problems. Sounds like you are going to have to reinstall windows 98 again --thats what I always had to do.

Answer 5

update your os ,98 is pretty outdated

Answer 6

What browser are you using to post this?

Answer 7

If you are experiencing frequent Invalid Page Faults (IPFs) or Memory Access Violation error messages like:

"Program.exe caused an invalid page fault in module MSVCRT.DLL at XXXX:XXXXXXXX."

when trying to open or close 32-bit apps in Windows 9x/ME, like Microsoft Office tools, Microsoft Internet Explorer 3/4/5/6, Netscape/Mozilla Communicator/Navigator 3/4/6/7, Microsoft Encarta, AOL 4/5/6/7/8 etc, you may need to update your Microsoft system libraries (DLLs) to their current versions: ASYCFILT.DLL, MFC42.DLL, MSVCRT.DLL, OLEAUT32.DLL, OLEPRO32.DLL + STDOLE2.TLB. All these files reside in %windir%\SYSTEM (%windir% is usually C:\WINDOWS).
See "WINDOWS 9X/NT/2000/ME/XP/2003 ESSENTIAL SYSTEM ADD-ONS" to download ALL necessary updates listed here.

Read this MSKB article (and click the related links) for more details.
To install these OLE Automation, Microsoft Foundation Class (MFC) and C Runtime Libraries Updates on your system:

* Windows 98 retail owners: Install the Microsoft Libraries Updates.

* ALL Windows 9x owners: Install Microsoft Internet Explorer 5.5 SP2 [Win95/OSR1/OSR2] or 6.0 SP1 [Win98/ME]. MS IE 5/6 upgrades all these libraries during Setup.

* Windows 95/OSR1/OSR2 owners who chose NOT to upgrade to MS IE 5.5 SP2 need to download + install the separate Microsoft MFC Libraries.

UPDATES:

1. If you use any 32-bit Internet application (i.e. web browser), you need to install the free Microsoft Internet Interoperability APIs (DCOM), which also update the OLE Automation Libraries for better compatibility:
* Windows 98/98 SE owners: download + install DCOM98 1.3.
* Windows 95/OSR1/OSR2 owners: download + install DCOM95 1.3.

2. If you own Windows 9x/ME or use ANY Windows applications written in or using JScript or/and VBScript, like Microsoft or Netscape 32-bit web browsers, you need to install the free Microsoft Scripting Engines (MSE) v5.6 Updates for Windows 9x/NT4/2000/ME/XP/2003, which include: VBScript 5.6, JScript 5.6, Windows Script Components, Windows Script Host 5.6 + Windows Script Runtime 5.6.

3. It is also recommended to install the free Microsoft Visual Basic 3.0 (VB3), 4.0 (VB4), 5.0 (VB5) and 6.0 (VB6) SP5 Runtime Libraries for Windows 3.xx/9x/NT/2000/ME/XP/2003, if using ANY Windows applications written in Visual Basic (VB).

BACK 2 CONTENTS
• 5-4-99 Win9x/ME Original Registry ©Trick found as Intro chapter in REGISTRY.TXT, part of W95-11D.EXE:


REGISTRY BACKUP + RESTORE


1. VERY IMPORTANT! HOW TO BACKUP/EXPORT YOUR REGISTRY *FIRST*:

1. Copy SYSTEM.DAT, USER.DAT (all Win95/98/ME releases) + CLASSES.DAT (WinME only) to a safe location, such as a BACKUP disk (removable media): cartridge, optical, (re)writable CD/DVD, tape etc.

NOTE: Registry files are usually too large to fit on a single 1.44 MB floppy disk, therefore you need to use a different media to back them up!

1. Create a DOS batch file called REGBAKUP.BAT (using Notepad) containing these lines (example):

@ECHO OFF
IF NOT EXIST E:\REGBAKUP\NUL MD E:\REGBAKUP
ATTRIB -H -R -S +A %winbootdir%\*.DAT
IF EXIST E:\REGBAKUP\*.DA2 COPY/Y E:\REGBAKUP\*.DA2 E:\REGBAKUP\*.DA3
IF EXIST E:\REGBAKUP\*.DA1 COPY/Y E:\REGBAKUP\*.DA1 E:\REGBAKUP\*.DA2
IF EXIST E:\REGBAKUP\*.DAT COPY/Y E:\REGBAKUP\*.DAT E:\REGBAKUP\*.DA1
COPY/Y %winbootdir%\SYSTEM.DAT E:\REGBAKUP
COPY/Y %winbootdir%\USER.DAT E:\REGBAKUP
IF EXIST %winbootdir%\CLASSES.DAT COPY/Y %winbootdir%\CLASSES.DAT E:\REGBAKUP
EXIT

presuming E is a removable backup drive. Change the paths to match your system setup.
Note that REGBAKUP.BAT creates up to 4 different copies of your Win9x/ME Registry files if run more than once: *.DAT (newest = default extension), *.DA1 (second to newest), *.DA2 (second to oldest) and *.DA3 (oldest).
In case of system lockups/errors/etc due to a corrupted Registry, you can restore your working (good) Registry files from the most recent backup by copying the *.DAT files from E:\REGBAKUP back to your Windows folder, overwriting the ones already there.
In case your E:\REGBAKUP\*.DAT files are also corrupted, rename the *.DA1 files to *.DAT and then copy them to your Windows folder, over the old ones.
Same procedure applies if the E:\REGBAKUP\*.DA1 files are corrupted: rename the *.DA2 files to *.DAT and then copy them to your Windows folder etc...
You can also modify REGBAKUP.BAT to create more than 4 backups in the same manner: copy *.DA3 as *.DA4, *.DA4 as *.DA5 etc...

2. Create a shortcut (.PIF file) to REGBAKUP.BAT in the Startup folder (C:\Windows\Start Menu\Programs\Startup), to backup the Registry files automatically (in the background) every time Win95/OSR1/OSR2 loads.
Win98/ME does this automatically upon the first load of each day. See "SCANREGW, SCANREG + SCANREG.INI", also in TIPS98.TXT [part of W95-11D.EXE], for Win98/ME Registry backup details!

2. To BACKUP the ENTIRE Registry to a .REG file (which is a plain text/ASCII file) from WITHIN Windows:

1. Run the Registry editor (Regedit.exe).
2. Highlight "My Computer" main tree.
3. Click on the "Registry" menu item.
4. Select "Export Registry File...".
5. Type REGBAKUP.REG (or whatever filename you wish, just keep the .REG extension) in the "File name" field.
6. Browse to the drive and folder where you want REGBAKUP.REG to reside.
7. Click the Save button.
Then you can open REGBAKUP.REG in a text editor, if you would like to make any changes.
You canNOT use Notepad, because it is limited to a maximum filesize of only 64 KB. Bummer... :(
Therefore you need to use a better text editor, that can handle very large text files, like Programmer's File Editor 32-bit for Windows 9x/NT4/2000/ME/XP/2003 [608 KB, freeware], the best in my opinion.

3. You can also EXPORT the ENTIRE Registry or only the keys/subkeys of your choice to a .REG file, ONLY from the native MS-DOS mode, using this REGEDIT command (example):

REGEDIT /E E:\REGBAKUP\REGBAKUP.REG

presuming E is a removable backup drive. Change the paths to match your system setup.
This exports the ENTIRE Registry to REGBAKUP.REG.

2. VERY IMPORTANT! HOW TO RESTORE/IMPORT/MERGE (INTO) YOUR REGISTRY:

1. To RESTORE the Registry files (i.e. after a system crash), FIRST exit Windows (or reboot) to the native/true/real MS-DOS mode.

IMPORTANT:

* To learn more about these issues, READ these topics [also part of W95-11D.EXE]:
o For details on how to boot to the native MS-DOS prompt, read "COMPLETE MSDOS.SYS REFERENCE", also in MYTIPS95.TXT.
o For details on how to exit Windows 9x to MS-DOS, read "EXIT TO DOS", also in TIPS95.TXT.
o For details on more MS-DOS boot options, read "2 DOS OR NOT 2 DOS", also in MYTIPS95.TXT.
o For details on how to PROPERLY recreate (compact/shrink) your Registry from an exported .REG file in Windows 9x, read "SHRINK THE REGISTRY!", also in MYTIPS95.TXT.
* Download the FIXed REGEDIT.EXE [53 KB, freeware] for ALL Win95/OSR1/OSR2/98 releases (NOT WinME!) to properly recreate/import into the Registry from REG files.
* Download FixReg [57 KB, freeware] to FIX the Windows 95/98 exported Registry recreation BUGs.

1. Create a Registry BACKUP using REGBAKUP.BAT, as explained in the "HOW TO BACKUP/EXPORT YOUR REGISTRY *FIRST*" topic (paragraph A) further above.

2. Create a DOS batch file (using Notepad) called REGRESTR.BAT, or whatever else you want (but keep the .BAT extension), containing these lines (example):

@ECHO OFF
MEM /C | FIND /I "vmm32">NUL
IF NOT ERRORLEVEL 1 GOTO END
ATTRIB -H -R -S +A %winbootdir%\*.DAT
IF EXIST %winbootdir%\*.DA0 ATTRIB -H -R -S +A %winbootdir%\*.DA0
IF EXIST %winbootdir%\*.BAD ATTRIB -H -R -S +A %winbootdir%\*.BAD
IF EXIST %winbootdir%\*.BAD DEL %winbootdir%\*.BAD
REN %winbootdir%\SYSTEM.DAT SYSTEM.BAD
REN %winbootdir%\USER.DAT USER.BAD
IF EXIST %winbootdir%\CLASSES.DAT REN %winbootdir%\CLASSES.DAT CLASSES.BAD
IF EXIST %winbootdir%\*.DA0 DEL %winbootdir%\*.DA0
IF EXIST E:\REGBAKUP\*.DAT COPY/Y E:\REGBAKUP\*.DAT %winbootdir%
:END
EXIT

presuming E is a removable backup drive. Change the paths to match your system setup.
The newest E:\REGBAKUP\*.DAT Registry backup files are copied back to your Windows folder, and the corrupted *.DAT files from your Windows folder are renamed to *.BAD (which you can delete later). Now (re)start Windows by running WIN.
If your newest *.DAT backup files are also corrupted, follow the steps outlined in "HOW TO BACKUP/EXPORT YOUR REGISTRY *FIRST*" paragraph A (further above) to restore your Registry from an older (good) backup.

3. Place REGRESTR.BAT in a folder in your path, specified on your AUTOEXEC.BAT or CONFIG.SYS PATH line.

4. Run REGRESTR.BAT ONLY from the native MS-DOS prompt, every time after you have been locked out of Windows, or experience sudden errors, and you KNOW this happened because of CHANGES (you or a buggy program/driver/etc) made to your Registry.

2. To IMPORT a .REG file (back) into the Registry from WITHIN Windows:

1. Run the Registry editor (Regedit.exe).
2. Click on the "Registry" menu item.
3. Select "Import Registry File...".
4. Browse to the drive and folder where your .REG file resides.
5. Double-click on it, or click the Open button.
6. Answer OK to the confirmation prompt.

3. To IMPORT a .REG file (back) into the Registry, ONLY in native/true MS-DOS mode OUTSIDE Windows, use this REGEDIT command (example):

REGEDIT E:\REGBAKUP\REGBAKUP.REG

presuming E is a removable backup drive. Change the paths to match your system setup.
To see all available REGEDIT parameters, run:

REGEDIT

ONLY from the native MS-DOS prompt.

4. To (RE)CREATE the Registry from scratch using a .REG file that contains your ENTIRE Registry, ONLY in native/true MS-DOS mode OUTSIDE Windows, use this REGEDIT command (example):

REGEDIT /C E:\REGBAKUP\REGBAKUP.REG

presuming E is a removable backup drive. Change the paths to match your system setup.
To see all available REGEDIT parameters, run:

REGEDIT

ONLY from the native MS-DOS prompt.

5. To MERGE (register) a .REG file (back) into the Registry from WITHIN Windows:

1. Start Windows Explorer or File Manager (FM = %windir%\WINFILE.EXE).
2. Browse to the .REG file you want to merge.
3. (Double)-click on it.
4. Click Yes to proceed.
5. Answer OK to the confirmation prompt.

FYI: More info @ MSKB:

* How to Backup, Edit and Restore the Registry in Windows 95, 98 and ME.
* How to Backup the Registry in Windows 95.
* How to Backup the Registry in Windows 98 and ME.

CAUTION: FAULTY CHANGES made to .REG files you import/merge/register into your Windows Registry may LOCK UP/CRASH your machine, and/or generate UNEXPECTED system ERRORS!

BACK 2 CONTENTS
• 5-4-99 Win9x/NT4/2000/ME/XP/2003/IE/Netscape Original Registry ©Trick in REGISTRY.TXT, part of W95-11D.EXE:


BROWSER CACHE IN MEMORY


To improve Internet browsing speed noticeably, you can use a temporary RAM (memory) drive to store the Temporary Internet Cache Files (TIF, as they are called if using MS IE), Cookies, Favorites (optional) and History folders, with both Netscape and Microsoft web browsers, all releases beginning with version 3.0.
This applies to ALL Windows 9x/NT4/2000/ME/XP/2003 builds, and specific procedures are detailed step by step separately below.
But first let's see the...

PROs:

* Can be used for storing ALL browser cache AND cookie files.
* Cuts down on hard disk activity noticeably.
* Provides much greater file storage efficiency, because a RAM drive uses 512 Byte size clusters, smaller even than the FAT32 file system (limited to a minimum of 1 KB default cluster size, on drives/partitions smaller than 512 MB).
* Avoids cluttering your hard disks with zillions of small temporary files.
* Cached web sites are accessed a lot faster.
* Windows GUI provides full 32-bit driver support for RAM drives.

CONs:

* By using Microsoft's DOS mode RAMDRIVE.SYS your CD/DVD drive letter will be shifted upwards by 1 letter. Example: if you have 1 hard drive (single partition) and 1 CD/DVD drive, the RAM drive will take letter D, and will shift the CD/DVD drive to letter E, in both DOS and Windows modes. Therefore you will need to update ALL your CD/DVD based applications/links to point to the new letter!
* MS RAMDRIVE.SYS can create a RAM disk of only 32 MB maximum size.
See XMS/EMS RAMdisk further below for a better RAM Drive replacement: maximum RAM disk size 2 GB!
* The ENTIRE contents of a RAM drive is GONE upon rebooting!
* You need at least 32 MB of memory (RAM) installed in your computer (64 MB recommended) to use this trick!
* WARNINGS:
o If using Microsoft Internet Explorer 3/4/5/6 you will NOT be able to download files larger than the RAM disk size, because MS IE downloads ALL files from the Internet into its cache (TIF) folders! Therefore you need to create a dedicated DOS batch file [HINT: using for example the MS-DOS XCOPY command for this job] to copy all cached files from the RAM disk to your local hard disk, and eventually delete them all afterwards [HINT: using the MS-DOS DELTREE/Y command] from your RAM drive, to make more room for further downloads, BEFORE shutting down or rebooting Windows.
o If you decide to relocate your Windows OS TEMP(orary) folder (governed by the TEMP and TMP environment variables = see futher below for details) to a RAM drive, you will NOT be able to install ANY program/game/update using file(s) LARGER than your RAM disk free space!

Necessary steps for creating a properly configured RAM drive to use as browser cache/cookie folder:

WINDOWS 95/98/ME:

1. Get XMS/EMS RAMdisk 16-bit DOS TSR improved Microsoft RAMDRIVE.SYS replacement for MS-DOS 5/6 and Windows 3.1x/9x/ME [74 KB, freeware], or XMS/EMS RAMdisk with installer/uninstaller for Windows 9x/ME [114 KB, freeware].
Install and configure XMS/EMS RAMdisk to load every time with Windows.
Do NOT reboot yet. Skip to paragraph 3 below to learn how to change the location of your web browser(s) cache/cookie folders to point to the RAM drive.

If using MS RAMDRIVE.SYS: add this line (example) to your CONFIG.SYS file to create a new temporary drive in your computer's memory (RAM):

DEVICEHIGH=C:\WINDOWS\RAMDRIVE.SYS 4096 /E

This creates a new 4 MB RAM drive in extended memory, but you can specify a different size (in KiloBytes), depending on the desired cache folder size, and your installed RAM.
To load RAMDRIVE.SYS in the Upper Memory Area (UMA), you need to use an upper/extended/expanded memory manager in CONFIG.SYS, like EMM386.EXE (bundled with MS Windows 9x/ME), with the NOEMS (to enable extended memory only) or RAM (to also enable expanded memory) switch. Example:

DEVICE=C:\WINDOWS\EMM386.EXE I=C800-EFFF I=B000-B7FF RAM D=256 AUTO

TIP: See my "Complete UMBPCI.SYS Guide", to learn how to use a better and faster (freeware) memory manager (provides ONLY upper, NOT expanded memory) in your CONFIG.SYS, in order to load XMSDSK.EXE or RAMDRIVE.SYS in the UMBs, thus saving conventional RAM.

Change the Windows folder name if different on your system.

2. Create a new temporary directory on the RAM drive to store all browser cache/cookie files, by adding this line to your AUTOEXEC.BAT file (example):

MD D:\TEMP

presuming you have only 1 hard disk/partition and 1 CD-ROM drive. Change this letter if you have more drives to the next available letter AFTER the last letter taken by your hard disks/partitions, and BEFORE the CD-ROM drive letter.
DO NOT allow your browser to use the root directory on the RAM drive as its cache folder, because the RAMDRIVE.SYS root directory can ONLY hold up to 512 files, because it uses the obsolete FAT12 (used on floppy disks) as its default File System!
FYI: FAT16 also supports ONLY maximum 512 root entries, and newer FAT32 allows unlimited root entries.

3. Modify your web browser settings to point to the new cache/cookie folder:

1. Netscape Navigator/Communicator 4.xx: click Edit -> Preferences -> double-click Advanced -> select Cache -> adjust the "Disk Cache Folder" to point to the directory you created on the RAM drive, then adjust the "Disk Cache" to match the size of the RAM drive -> click OK.
Netscape/Mozilla 4.xx/6.xx/7.xx browsers use the \Netscape\Users\Your_Email_Name folder (default) for storing cookies. But you can change the COOKIES.TXT file location to the drive/partition + folder of your choice, thanks to Tom:

"Open Start Menu -> Netscape -> Utilities -> User Profile Manager -> create a NEW profile -> enter the disk + folder location when requested -> browse to your RAM disk drive letter and select the TEMP directory (example).
From now on your ENTIRE profile (including COOKIES.TXT) will go there."

IMPORTANT: The downside is that you need to SAVE this entire folder contents to your hard disk EVERY TIME BEFORE shutting down or rebooting your PC (eventually using a dedicated DOS batch file shortcut), otherwise it will be wiped out. :(
For this purpose, use Notepad to create a file with the .BAT extension for complete automation, using E as RAM drive, E:\TEMP as new profile location and C:\TEMP as hard drive destination folder for saving and restoring your profile every time before opening your browser and after closing it, and including a command line for starting Netscape.exe in between (example):

@ECHO OFF
XCOPY /E/H/I/R/Y C:\TEMP E:\TEMP
START/W NETSCAPE.EXE
XCOPY /E/H/I/R/Y E:\TEMP C:\TEMP
EXIT

If any of these drive letters and/or folder names are different on your system, change them accordingly.
Last step is to create a shortcut for this BAT file into the Start Menu folder of your choice, and from now on just run Netscape from this new shortcut. Make sure your MS-DOS PIF (Program Information File) shortcut is set to close at the end: right-click on it -> select Properties -> Program tab -> check the "Close on exit" box -> click OK -> done. :)

UPDATE: "There is no Preferences option to move the Netscape 6.xx/7.xx, Mozilla Gecko or Firefox Cache folder location to a RAM (or any other) drive and/or directory.
But you can achieve this without creating a new profile on your new target (RAM) drive and then copying this profile to and from the RAM disk every time you restart the computer.
Just open the Prefs.js file (located in %windir%\Application Data\Mozilla\Profiles\UserName\xxxxxxxx.slt = replace UserName with your actual user name) in Notepad and modify this line to whatever you wish:

user_pref("browser.cache.disk.parent_directory", "X:\\Cache");

Replace X with your desired drive/partition letter and Cache with your folder name (long file names are accepted).
Save your work and exit Notepad.
FYI: This tweak is found at Mozilla.org.
[Thank you Biolex!]

2. Microsoft Internet Explorer 4/5/6: click Tools -> Internet Options/Properties -> click the Settings button in the "Temporary Internet Files" area -> click the "Move folder" button -> browse to and select the directory you created on the RAM drive, then "Adjust the amount of disk space to use" to match the size of the RAM drive -> click Apply/OK.
In case MS IE won't allow moving its cache folder from the Internet Properties applet, you can still force it to do so by merging the IECACH9X.REG REG file [9 KB, ZIPped; use one of these "FREE 9X/NT/2000/ME/XP/2003 FILE SHRINKERS" to extract the files] into your Registry by (double)-clicking on it in Windows Explorer or File Manager (FM = C:\WINDOWS\WINFILE.EXE), but BACKUP YOUR REGISTRY FIRST!

IECACH9X.REG contains also the necessary Registry keys for redirecting IE's Cookies, History, URL History and Favorites folders to the TEMP directory on your RAM disk. This is cool if you have no use for them, and would prefer to "clean up" your hard disk(s) a bit, like I do. :)
Some of these key names may differ slightly depending on your MS IE built, like the "5.0" Cache keys that are used only by IE 5.xx/6.xx.
Open IECACH9X.REG in Notepad and replace the RAM drive letter (E in this example) if different on your computer.

4. OPTIONAL: Redirect your TEMPorary folders location to the RAM disk by adding/changing these lines in your CONFIG.SYS file (located in C:\ root) with Notepad/Sysedit:

SET TEMP=E:\TEMP
SET TMP=E:\TEMP

IMPORTANT: Microsoft acknowledged that RAMDRIVE.SYS canNOT be used in Windows ME because real DOS mode [and CONFIG.SYS] has been removed.
Therefore Windows ME users MUST apply one of these Unofficial DOS Patches, which modifies COMMAND.COM + IO.SYS (from C:\Windows\Command\EBD) + REGENV32.EXE (from C:\Windows\System), in order to be able to boot to native MS-DOS and use DOS mode startup files (AUTOEXEC.BAT + CONFIG.SYS), Windows 95/98 style.

5. Reboot.

6. Done. :)

Another way to redirect (and empty periodically by deleting all temporary files) your MS IE 4/5/6 Cache, Cookies, Favorites and History folders to a different (single) location (i.e. a RAM disk) is to use these 98lite CacheCloak INF files [freeware].

UPDATE: "There is a much better DOS based RAM Drive called XMS/EMS RAMdisk (freeware), which does NOT shift drive letters, also available with automated install/uninstall [114 KB, freeware].
I have 128 MB and I use a RAM disk of 46 MB, which can be extended to up to 2 GB, depending on how much memory you have.
These 2 RAMdisk drivers can load in either extended (XMS) or expanded (EMS) memory. Example: place a line for the XMS driver in your AUTOEXEC.BAT:

LH XMSDSK 46080 E: /C1 /T /Y

LH (LOADHIGH for short) loads it in upper memory, if you have an upper memory manager present in your CONFIG.SYS, like MS EMM386.EXE (found in your main Windows 9x/ME folder) or UMBPCI.SYS (freeware, the BEST in the business).
Meaning:

46080 = RAM disk size in KB.

E: = desired drive letter.

/C1 = cluster size set to 512 Bytes. /C2 = 1024, /C4 = 2048 (ONLY doubling works: 2, 4, 8 etc, NOT 3, 5, 7 etc).

/T = use extended (XMS) RAM from top in a contiguous block: A MUST!
IMPORTANT: /T MUST be used with ANY 16 MB or larger RAM disk, otherwise Windows 95/98/ME does NOT properly initialize IOS (Input Output Subsystem) [RMM (Real Mode Mapper) fails to load], and as a consequence LFNs (Long File Names) support will be DISABLED on the RAM disk.

/Y = to disable the confirmation prompt for uninterrupted operation.

If using a folder other than the root folder of your RAM drive (recommended!) for the MS IE temporary cache files, you need to add another AUTOEXEC.BAT line below the line that loads XMSDSK to create the respective directory (example using the same RAM drive letter above):

MD E:\TEMP

You can turn off your RAMdisk by running XMSDSK again with the /U switch:

XMSDSK /U /Y

or you can disable it altogether by typing a double colon (::) or REM in front of the XMSDSK AUTOEXEC.BAT line.
I load and save the MS IE cache files to disk by using 2 DOS BATch files, but this can be also automated by Netlaunch (freeware) at the beginning and at the end of a dialing session.
The only disadvantage is that RAMdisk cannot be resized at will."
[Thank you Sven!]

WINDOWS NT4/2000/XP/2003:

1. Get one of these freeware RAM Disk Drivers for Windows NT4/2000/XP/2003, both found here:
* AR RAM Disk [discontinued :(], max RAM drive size 2 GB, includes tweaking Control Panel applet (.CPL), highly customizable.
* RAMDisk replacement for Microsoft RAMDISK.SYS, maximum RAM drive size 64 MB (2 GB version available upon request).

2. To install one of these RAM Disk Drivers: log on as Administrator/Power User -> unZIP ramdisk.zip if using AR RAM Disk -> run the setup executable to install it -> do NOT reboot yet!
If using RAMDISK.SYS see this Microsoft guide to customize your RAM drive to your needs.

3. (Double)-click on IECACHXP.REG [9 KB, ZIPped; use one of these "FREE 9X/NT/2000/ME/XP/2003 FILE SHRINKERS" to extract the files] to move all MS IE temp folders to the newly created RAM disk: E:\TEMP used here, change if necessary to match your particular settings.

4. OPTIONAL: The extra lines at the bottom of IECACHXP.REG relocate all TEMPorary files created by the OS to the RAM disk E:\TEMP target directory.
Open IECACHXP.REG in Notepad and change the drive letter and/or folder name to match your particular/desired settings, or REMark (disable) them by preceding each line with a semicolon (;), if you don't want to move the TEMP and TMP folders to the RAM drive.
Note that the RAM disk will occupy the next available letter after the last local drive/partition already installed in your system, excluding eventual network/remote drives, which are usually positioned towards the end of the alphabet (e.g. M-Z). In case your network drives follow immediately after the local drive letters, you need to count them all in.
To find out your RAM disk drive letter, open Windows Explorer, scroll down to the last (local) drive/partition letter and add 1 to it.
When done, run IECACHXP.REG to relocate all MS IE 4/5/6 Cache, Cookies, Favorites and History folders to the newly created RAM drive.
If you don't want to move your Favorites folder to the RAM disk, open the REG file in Notepad, and REMark (disable) all "Favorites" lines from IECACHXP.REG by preceding each of them with a semicolon (;).

5. Customize your RAM drive size following the same rules as described above (try not to go over 1/4 of your total installed PC memory) by using the included Control Panel applet (if using AR RAM Disk) or your newly created RAM Disk Properties right-click menu (if using RAMDisk).

6. See paragraphs 3A & 3B under the "WINDOWS 95/98/ME:" subtitle above to find out how to change the location of Cache and Cookies folders in Microsoft and Netscape browsers without modifying the Registry.

7. If all your hard drives/partitions are using NTFS and/or you have no floppy drives attached to your (portable) computer, Windows 2000/XP/2003 may not load the FastFAT driver. :( In this case you need to fire up Regedit and go to:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Fastfat

In the right hand pane double-click on the "Start" DWORD [REG_DWORD] Value -> modify its Data value to read 1 -> exit the Registry Editor.

8. Reboot.

9. Done. :)

BRANDED MS IE


This trick applies to ALL MS Internet Explorer 4/5/6 and newer 32-bit releases.
If you have downloaded/installed Microsoft Internet Explorer 5.0 Public Release (example used here) from ANY other web site than Microsoft's, you may have a so-called "branded" IE5 version, which might have a different name and/or spinning logo, usually displaying that company's name or logo.
But if you want your "original" (unmodified) IE copy back, there are a few things you can do:

1. First, make sure to close ALL IE browser windows.

2. Even if you have already installed a "branded" copy of IE5, you can always reinstall it. Open the folder IE5's installation files reside into, and move the Branding.cab file to another location. Now download Microsoft's original Branding.cab for [right-click to save!]:
* MS IE 5.x [10 KB, free].
* MS IE 6.0 [8 KB, free].
Place it into your IE Setup folder. Reinstall IE. No need to uninstall it beforehand, ONLY IF you first installed the current version: IE5 Public Release 32-bit for Windows 9x/NT4 (Intel platforms), build 5.00.2314.1000 (second "silent" release), BUG fixed. To tell exactly your IE vesion/build, open your IE folder and right-click on Iexplore.exe. Select Properties and click the Version tab.

3. To revert IE's title to its original, run Regedit.exe and go to:

HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Main

and to:

HKEY_USERS\.Default\Software\Microsoft\Internet Explorer\Main

Look in the right hand pane for the "Window Title" String Value. You can either modify it to show the original name (Microsoft Internet Explorer), customize it to your heart's content, or simply delete it.

4. To get back the MS IE spinning (globe) logo, run Regedit.exe and go to:

HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Toolbar

In the right hand pane: double-click on the "BrandBitmap" String and delete its value, or delete the entire "BrandBitmap" String. Do the same with "SmBrandBitmap".

5. Alternative method without modifying the Registry: click the Start button -> Run... box -> type the command line below -> click OK or hit Enter:

rundll32.exe iedkcs32.dll,Clear

6. Restart IE. Voila! The original title and logo have been restored. :)

More information here if nothing works :-(
http://www.mdgx.com/newtip12.htm
http://cma.zdnet.com/book/win98prfref/ch27/ch27.htm