2006-06-30 22:15:07 · 8 answers · asked by ant 1 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
undo the lug nuts ??
2006-06-30 22:18:06 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Jack up your Camaro and dont forget to set your parking brake or chock one of the tires not being removed. Get you a 4-way tire iron (a x shaped tool with 4 different sockets on it). Make sure it is standard measurement and find the correct size and proceed in taking off the lug nuts. Turn to the left to loosen them. That should do it.
2006-07-01 05:27:34 · answer #2 · answered by xllx_nissan_skyline_gtr34_xllx 1 · 0⤊ 0⤋
If youve removed all the lugs and the wheel is still stuck on take a large hammer and whack the wheel from the back side. This breaks the rust free.
2006-07-01 06:08:29 · answer #3 · answered by ThisJustin 5 · 0⤊ 0⤋
Loosen the nuts that hold it on. If you can't turn the wrench then use a long pipe to put on the wratchet holding the socket cause some half baked mechanic/tire changer used an impact wench and tightened it down too tight. The long pipe will give you extra leverage
2006-07-05 22:14:21 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Jack the vehicle up to support the front-end. Remove the lug nuts, then remove the wheel. IF you are trying to rotate it to the rear--it will not work.
2006-07-01 10:24:55 · answer #5 · answered by chevygirl440 3 · 0⤊ 0⤋
same way to take the front right wheel off any other car...grow some balls and a lug wrench
2006-07-01 05:19:30 · answer #6 · answered by Anonymous · 0⤊ 0⤋
you should have a special socket somewhere in car to where you can change the wheel
2006-07-02 23:47:27 · answer #7 · answered by cwb63ss 6 · 0⤊ 0⤋
take off the lugnuts....
2006-07-01 05:19:18 · answer #8 · answered by Adam's Dad 2 · 0⤊ 0⤋