Can i unscrew something to make it lower
2006-06-30 15:32:04 · 7 answers · asked by M.D M 1 in Cars & Transportation ➔ Motorcycles
It depends on the model and type of suspension. To lower the front end, raise the fork tubes in the triple clamps. For the rear you can either adjust the linkage or replace it with a lowering linkage. Check some of the online sportbike sites. Be careful though - when you lower the bike you will change the stearing geometry and the handling characteristics. If you only need a little more room, you can take the seat apart and shave some of the foam off of it.
2006-06-30 18:24:30 · answer #1 · answered by jeffma807 4 · 0⤊ 0⤋
Along with adjusting the preload and linkages, you can also consider shaving the seat. Most bikes have plenty of cushioning so shaving off a couple inches of foam won't affect comfort too much. It'll also retain the handling features of the bike.
Here are some instructions with pictures: http://bayarearidersforum.com/forums/showthread.php?s=22e15e2fb243546cface0013f1ac6650&threadid=120053&perpage=15&highlight=shave&pagenumber=1
Be aware if you do end up lowering the bike by messing with the linkages, you'll likely need to cut and reweld your sidestand otherwise it'll be too long.
2006-07-02 21:55:31 · answer #2 · answered by crazy_sherm 4 · 0⤊ 0⤋
You can also get different sizes of dogbones, which isn't too expensive but can definitely affect the handling of the bike. It depends on how much you need to lower it.
2006-07-02 01:13:44 · answer #3 · answered by Oracle at Delphi 3 · 0⤊ 0⤋
Decrease the ride-height of the bike.
2006-07-01 12:43:01 · answer #4 · answered by I am rock 4 · 0⤊ 0⤋
sell the bike and buy something you can ride properly.
2006-07-04 16:18:11 · answer #5 · answered by voyager01964 2 · 0⤊ 0⤋
cant u lower the seat?
2006-06-30 22:35:14 · answer #6 · answered by Saedii 4 · 0⤊ 0⤋
Just take it to a certified mechanic, and they can do it for you.
2006-07-06 02:26:18 · answer #7 · answered by macrosfear 2 · 0⤊ 0⤋