2006-06-29 16:38:24 · 4 answers · asked by brettbrissaw 3 in Home & Garden ➔ Maintenance & Repairs
MIG (Metal Inert Gas) or as it even is called GMAW (Gas Metal Arc Welding) uses an aluminium alloy wire as a combined electrode and filler material. The filler metal is added continuously and welding without filler-material is therefore not possible. Since all welding parameters are controlled by the welding machine, the process is also called semi-automatic welding.
The MIG-process uses a direct current power source, with the electrode positive (DC, EP). By using a positive electrode, the oxide layer is efficiently removed from the aluminium surface, which is essential for avoiding lack of fusion and oxide inclusions. The metal is transferred from the filler wire to the weld bead by magnetic forces as small droplets, spray transfer. This gives a deep penetration capability of the process and makes it possible to weld in all positions. It is important for the quality of the weld that the spray transfer is obtained.
There are two different MIG-welding processes, conventional MIG and pulsed MIG:
Conventional MIG uses a constant voltage DC power source. Since the spray transfer is limited to a certain range of arc current, the conventional MIG process has a lower limit of arc current (or heat input). This also limits the application of conventional MIG to weld material thicknesses above 4 mm. Below 6 mm it is recommended that backing is used to control the weld bead.
Pulsed MIG uses a DC power source with superimposed periodic pulses of high current. During the low current level the arc is maintained without metal transfer. During the high current pulses the metal is transferred in the spray mode. In this way pulsed MIG is possible to operate with lower average current and heat input compared to conventional MIG. This makes it possible to weld thinner sections and weld much easily in difficult welding positions.
2006-06-29 16:43:39 · answer #1 · answered by Anonymous · 4⤊ 0⤋
Close...Metal Inert Gas rather than magnesium, to differentiate it from Metal Active Gas welding.
2006-06-29 23:46:29 · answer #2 · answered by spiritlighthealing 1 · 0⤊ 0⤋
magnesium inert gas ?
2006-06-29 23:41:14 · answer #3 · answered by ? 7 · 0⤊ 0⤋
My innards glow???
2006-06-29 23:41:56 · answer #4 · answered by crystal lee 5 · 0⤊ 0⤋