How do I sand down a table?

Answer 1

First thing is to find what type of sanding tool works best for you. I like a finishing sander with a bag so that the dust isn't flying so much. You will also need sandpaper but I like the sandpaper sponges, they have different grains which tell you what each will do. This is good for the legs and in tight spaces, also I like to use the sponges with water to clean off and loosen anything that is left behind. After that I let the table sit overnight then you can either find a stain of the color or choice you like. I find that doing a couple of coats gives a good saturation of the color desired. Or you could just leave and oil the wood, some people like a gloss so then you can seal the table also. Librarys have wonderful books that will give you a step by step example. as does Martha Stewart.com.

Answer 2

Start with course grain paper and graduate to fine.

You might find that a liquid stripper (available for about $8 at Lowes) will help you remove wood coloration stains that are on your table. Look in the aisles near the paints.

Answer 3

i would go with a sander but like they said you have to be careful of what grit for your sandpaper, you dont want anything to harsh, i think you need to give some more info sug

Answer 4

Not knowing what type of wood or if it is wood I will do my best. If it is wood, go with the grain. The finer the wood, the finer the sandpaper.

Answer 5

an electric sander or sand paper does well