i accidentally hit one of the cameras with my lawn mower so that is what makes it not want to close but how do i fix this it goes down for a few moments then stops and goes back up
2006-06-29 07:31:39 · 5 answers · asked by mnieli90 2 in Home & Garden ➔ Maintenance & Repairs
at the camera as you call it is really an inferred beam bounced back by the placement of mirrors all you have to do is adjust the lining of the camera end and the mirror on the other side easily done with a flash light
turn off the lights stand on camera side and flash the light to the other side
2006-06-29 07:51:58 · answer #1 · answered by Cherie M 2 · 2⤊ 0⤋
Well, did you think about repositioning the "camera" you knocked with the mower? This is probably a laser that must hit the reflector on the other side of the door opening to get a signal back that there isn't anything in the path of the door. It's a safety feature on closers.
2006-06-29 07:40:22 · answer #2 · answered by Jeffrey S 6 · 0⤊ 0⤋
The "camera" or sensor is seeing something in it's path. make sure it is lined up with the one on the other side of the door. There are usually two. Make sure the area immedialtely below the door is clear. Occasioanllly I have seen where the door casting it's own shadow while it's closing will trigger the sensor.
2006-06-29 07:39:14 · answer #3 · answered by leebert 1 · 0⤊ 0⤋
there might be something in the way. if there is than it wont close. also the lazer on the ground that is supposed to know if there is something in the way needs to line up to the other side of the door. in might not be lined up.
2006-06-29 07:35:30 · answer #4 · answered by nate 2 · 0⤊ 0⤋
you need to make both the sensors line up exactly. there is a lazer bean that goes across just move one of the sensors and it will work.
2006-06-29 07:41:57 · answer #5 · answered by alan 1 · 0⤊ 0⤋