I have Systems Mechanics 6 installed, and i run it quite often. Today when i tried to run it, I had a message come up that said, my virtual memory was to low to run it. Then on something else, I had one that said I had no memory. What can I do to correct this? Thanks for anything, anyone can tell me to help.
2006-06-29 00:45:08 · 5 answers · asked by Gena *n* GA. 2 in Computers & Internet ➔ Hardware ➔ Other - Hardware
You go to Start Menu.
Control Panel.
System.
And then click on the Advanced Tab.
Under Performance there is a settings tab.
You can increase your virtual memory there, but I wouldnt touch it because it usually allocates it the best way possible so that your computer and your graphics card gets the most from your memory.
It usually means you might need to upgrade your memory. Go to control panel again, then system, and then check your computer information and see how much memory you have. If you only have 128MB RAM, which is the standard that new computers come in, then you might need to add more RAM.
The more the RAM, the better performance of your computer. If you only have 128MB RAM then that basically means that you cant have much more than maybe 3 or 4 programs opened at the same time.
If you need more help or if you want instructions on how to install more memory, then contact me in my profile.
2006-06-29 00:47:45 · answer #1 · answered by Sean I.T ? 7 · 1⤊ 0⤋
Press your windows key and break at the same time.
Click Advanced
Under preformance click settings
Click the advanced tab
Under VIRTUAL MEMORY click the Change button
Press custom Size
Increase your minimum to about twice what it is now *This will eat a corrisponding amount of hard disk space*
Press Set.
Press Ok... About 10 times.
You should be good to go. Except System Mechanic is basic junk.
2006-06-29 07:51:34 · answer #2 · answered by profit0004 5 · 0⤊ 0⤋
virtual memory is used when u run a program on computer.
when u run too many programs on ur computer usually ur virtual memory will ran out very quick. u have to install more RAM, or manage ur usage of program when using ur computer
2006-06-29 07:52:38 · answer #3 · answered by kaiser_ziegfried 3 · 0⤊ 0⤋
Try increasing your paging size
right click MyComputer > Properties > Advanced > Performance Option > Change
There increase you maximum size and click set !!
and try restarting.
2006-06-29 07:51:02 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Install more RAM
2006-06-29 07:48:15 · answer #5 · answered by Anonymous · 0⤊ 0⤋