Reseating it will only make a difference if the system is not recognizing the ram. Otherwise reseating it won't do anything.
2006-06-28 07:56:28
·
answer #1
·
answered by thunder2sys 7
·
2⤊
0⤋
RAM can be awkward to remove/fit as it is not always easily accessible in the newer smaller motherboards. Getting it to seat again can be a fiddle, quite a bit of pressure is sometimes required and I know people who have been frightened to use sufficient force especially if the board is not properly supported as it can bend alarmingly.
Ram is held quite tightly. If the pc has worked for a long time and has not recently been moved or jolted it is unlikely to have worked loose. But hey, remove the case /panels and take a look and feel if it the cards are not seated and held by the clasps at the end of each socket, you wont do any harm. Make sure it is off and you are properly grounded for static etc.
If a card is not properly seated the PC will not boot on the second attempt as you said yours does in another question, so I can't that this is your problem. The card may be failing and this may show up more when it is cold, hence working a while after the 1st boot attempt.
Get hold of SISoft Sandra and run the tests, they may highlight which component is unreliable
try http://www.sisoftware.net/
2006-06-28 08:14:52
·
answer #2
·
answered by Anonymous
·
0⤊
0⤋
No. Any consequence of broken RAM ought to basically come contained interior the variety of a well-known-day it fairly is outdoors the secure practices specs of the motherboard. there is not any reason to have confidence this might happen as quickly as you try the busted RAM on yet yet another board. for specific there *is* a guess that the rather act of putting the RAM can thoroughly harm your pc. examine the producer's secure practices classes.
2016-12-08 13:34:56
·
answer #3
·
answered by ? 3
·
0⤊
0⤋
I will repeat my answer:
If you are comfortable working with hardware, then try reseating your RAM. Also check if there is any dust in your computer or not. If yes, then remove the dust using proper tools. If still this is a regular problem, then get your system checked. The problem could be with the BIOS corruption or with any hardware.
Hey and yes, also try replacing your Motherboard's battery!
All the Best!
Cheers,
Manish
2006-06-28 07:59:47
·
answer #4
·
answered by Manish K 3
·
0⤊
0⤋
You have to have the RAM in order from least to greatest. If its not it wont recognize it. If its allready in order then reseating it will do nothing but make it worse.
2006-06-28 07:57:46
·
answer #5
·
answered by Nate H 1
·
0⤊
0⤋
if your pc is showing the amount of ram you have as correct ie you have 512 and your system shows 512 then it would make no difference at all
if your have a problem then ask for solutions to that problem and we will give hopefully a fix
2006-06-28 20:03:03
·
answer #6
·
answered by bbh 4
·
0⤊
0⤋
make a difference to what?
since u would only need to do that if your machine doesnt POST
2006-06-28 07:57:10
·
answer #7
·
answered by Paultech 7
·
0⤊
0⤋
NO
2006-06-28 07:57:14
·
answer #8
·
answered by Da Coolest Prince 1
·
0⤊
0⤋