everytime i put in a new fuse on my 98 blazer for the 4wd is keeps blowing out, what can i do to fix it myself? if possible.
2006-06-27 07:19:13 · 6 answers · asked by wb9futeba 1 in Cars & Transportation ➔ Maintenance & Repairs
Wrong fuse size or there is an excessive current draw in circuit. Has anything been added to the circuit like extra lights or accessory equipment? If fuse is correct and there are no changes to the designed circuit, then there is something wrong with the wiring.
2006-06-27 07:25:42 · answer #1 · answered by Richard B 4 · 0⤊ 0⤋
I would try an auto reset circuit breaker. After installing this trace all related wiring and look for bare wire touching ground. The circuit breaker will reset and make the short easier to find. Feel all related switches and wires for excessive heat. A wiring diagram will help you search for related components.
2006-06-27 15:02:14 · answer #2 · answered by panther 1 · 0⤊ 0⤋
check the whole circuit from beginning to end. like the other person said, it could too small a fuse, but it could also be hot wires grounding out...that's why you should try and check the whole circuit.
2006-06-27 15:00:22 · answer #3 · answered by Ryan 4 · 0⤊ 0⤋
there is a short, or something is in contact with bare-wire, check the circtuit for nicks, weathering, or even moisture.
2006-06-27 15:15:37 · answer #4 · answered by kyle 2 · 0⤊ 0⤋
you can have to much power if u have a system or something or it could be to small
2006-06-27 14:28:51 · answer #5 · answered by Tom B 1 · 0⤊ 0⤋
fix the problem..........! !
2006-06-27 17:30:38 · answer #6 · answered by pack23wolfden 3 · 0⤊ 0⤋