2006-06-27 02:07:19 · 4 answers · asked by Anonymous in Home & Garden ➔ Maintenance & Repairs
first disconnect the shut off switch then check to see if the coil wire pulled out of the coil if not its a bad coil. if it an old saw it might have points if it does then new points and condenser
2006-06-28 14:40:48 · answer #1 · answered by Anonymous · 1⤊ 0⤋
Ryobi Petrol Chainsaw
2016-12-12 04:54:24 · answer #2 · answered by killeen 4 · 0⤊ 0⤋
Check the wire from the kill switch to make sure it isn't shorted to the frame . That would prevent the spark . Or the switch may be defective or stuck .
2006-06-27 03:58:32 · answer #3 · answered by jim d 3 · 0⤊ 0⤋
clean the air filter then try it if not that dump out the fuel out and put fresh fuel in and mix it right if it is a 2 cycle motor and then prime the motor if it has the gas builb on it and try it good luck!
2006-06-27 02:16:07 · answer #4 · answered by Paul G 5 · 0⤊ 0⤋