How do I remove a rocker arm stud from a 1978 chevy without the tool, and can I put a pressed one back in with the heads still on?
2006-06-25 04:14:55 · 4 answers · asked by elenor31 2 in Cars & Transportation ➔ Maintenance & Repairs
It cam be removed by "pulling" it out with some washers and the nut. remove the rocker arm and stack washers on then thread the nut on and tighten. The nut against the washers will pull the stud out.
Good luck getting one back in. Machine shop is your best bet.
2006-06-25 07:42:08 · answer #1 · answered by prd2boft 2 · 0⤊ 0⤋
probly have to take to machine shop to remove it .and also i would probly have it drilled instead of pressed in.
2006-06-25 13:29:04 · answer #2 · answered by bfchugz 1 · 0⤊ 0⤋
I have no knowledge about this.
2006-06-25 11:52:20 · answer #3 · answered by Halle 4 · 0⤊ 0⤋
yes.no.
2006-07-01 18:59:55 · answer #4 · answered by redray_74 2 · 0⤊ 0⤋