Complete instructions provided with this link
http://www.diynetwork.com/diy/pac_ctnt/text/0,2019,DIY_14161_40182,00.html
Best wishes! :)
2006-06-23 06:54:25
·
answer #1
·
answered by Anonymous
·
7⤊
0⤋
Do NOT attempt to repair...you have some serious problems inside your walls.. it may be green board as the substrate for the walls..this stuff deteriorates with time. You will have water inside your walls doing the rot thing. Be thankful you have had this warning. Tear out all walls in the shower area, be very careful NOT to disturb the pan lining that comes up the walls if this is a shower. Allow wood to completely dry out, check for mold (spray with Clorox if you have mold). Once the wood is dry, install a tile board on the walls (cement with resins...Durock, or another brand, is 1/2" think. Tape with thin set, then install new tile, grout. Sorry to be so pessimistic, but ...those are the facts, nothing but the facts.
2006-06-23 07:52:33
·
answer #2
·
answered by Anonymous
·
0⤊
0⤋
First you pick to sparkling off the realm from which the tiles fell. Then take a small piece of sand paper to sparkling and roughen the realm gently. With a spackle knife practice a skinny quantity of versatile white cement depending tile adhesive (Acrylic depending). Mount the tile decrease back into position and sparkling the gap around the tiles of debris and extra adhesive. next practice grout around the tile once the cement has finished cured. allow the grout set and the sparkling away the extra grout previously it receives too not common. try no longer to get the tiles moist for more effective or less 24 hours after that. good success :)
2016-11-15 04:18:01
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
One simple remedy for this kind of situation is simply to use an adhesive like Liquid Nails to glue the tile back on. Then get a tube of silicone caulk and use that as a "grout" around the edges of the tile. This is an effective, but inexpensive repair that will remedy the situation until someday when you want to re-model the bathroom.
2006-06-23 07:06:50
·
answer #4
·
answered by firm_shake 4
·
0⤊
0⤋
There is adhesive you can use to glue it back and grout to fill in the spaces. Home Depot or Lowes.
You should check first as to why it fell. Moisture might be seeping in from somewhere. Look for a leak in your plumbing system. Could even be from upstairs, as bathrooms are often right above each other in multi-story houses.
2006-06-23 06:53:50
·
answer #5
·
answered by Joe D 3
·
0⤊
0⤋
Goldwings got the correct idea. Do not attempt to cover it up or mask it. It fell off from moisture behind it. Moisture is not your friend.
2006-06-23 08:43:21
·
answer #6
·
answered by educated guess 5
·
0⤊
0⤋