My washer is a kenmore direct drive and after some research I believe it might be the clutch or the rod that runs up the center of the agitator. Any thoughts?
2006-06-22 13:46:57 · 3 answers · asked by Anonymous in Home & Garden ➔ Maintenance & Repairs
The Agitator is stripped. The post that actually agitates the clothes sits on a knurled post . When you overload the washer time and again (I've done this ..voice of experience) you strip the plastic innards out of the agitator. Get a new agitator from any Sears service center.
2006-06-22 14:06:19 · answer #1 · answered by Steve K 1 · 1⤊ 0⤋
I had a Whirlpool for 15 years and the only thing ever fixed on it was the agitator....turned out there is a (very inexpensive) washer or gasket on it that had worn away. A tip might be if you find what looks like rubber shavings under your washer. (I thought at first I had mice!!)
2006-06-22 21:03:28 · answer #2 · answered by momofboys 3 · 0⤊ 0⤋
Take it easy on loading it up. Might be the belt.
2006-06-22 20:49:51 · answer #3 · answered by mrsdebra1966 7 · 0⤊ 0⤋