how do you siphon gas out of a truck?

Answer 1

Find a plastic tube, maybe 2 meters long, stick it into the tank all the way to the bottom. Suck on it until you can see the gas coming out, and then drop the tube into a 1 or 2 liter gas can or container. To stop the flow, pull the tube up, put your finger over it and hold it up in the air until gravity pulls the gas back down to the tank. Avoid getting gas in your mouth. Yuk! Good luck.

Answer 2

What year is the truck, newer models have a anti-siphoning device that will prevent you from sucking the fuel from the tank. If the truck has been sitting for a long time, leave the gas, gas will go bad and you don't want to put bad gas in (especially) a fuel injected vehicle.

Answer 3

get a jerry-can and a hose. put one end in the gas tank and the other in the top of the jerry-can. suck hard (on the end going into the jerry-can) and gas should flow freely down into the jerry-can because of gravity. and then lift the hose up when your done.

Answer 4

put a small hose into your tank hold your hand over the filler neck and blow or suck a little in the hose and gas will come out .when you have enough to fill your can pull the hose out

Answer 5

put a tube into the gas tank, suck on the end of it to bring the gas out

Answer 6

a cut water hose works the best, suck until it starts to come out and also some vehicles have filters which will not allow you to do this

Answer 7

A rubber hose and suction

Answer 8

take a hose, put it in the tank and start a suction with a vaccumm or your mouuth then put it in whatever your tryin to put it in

Answer 9

put a hose in and suck, becareful of the fumes, they taste nasty.

Answer 10

carefully