Where can I find embroidery designs for a Viking Rose embroidery Machine?

Question

I only have a 4-inch embroidery field, thanks!

does anyone know? C'mon!!

Answer 1

The Rose uses the HUS format *NOT* PES format but if you have editing software then you can convert from other formats such as PES. You will need to have hardware to save your designs to Viking cards (usually known as #1+ & Rose Viking Embroidery Card). You can find many sites that offer free designs such as Secrets of Embroidery, Viking site, Brother site, etc. If you don't have the Viking card reader/writer, then you need another Reader/Writer so that you can write your designs to a Viking Card or a Magic Card that is designed for Viking Rose machines.

You can also use VIP formats as well as the HUS format but you still need to convert those designs to your embroidery card. Editing Software to check out is Embird.com and Buzz Tools as well as the Viking software.

There are many designs that fit in a 4x4 inch field available. In addition to downloading designs and outputting to the Rose Card, you can buy cards that the Rose Machine accepts. These you get at your Viking dealer, or from OESD and Amazing Designs. The cards are very expensive, about $100-$150 each. So, your best bet is to have Reader/Writer Hardware that saves designs to a Viking Rose #1+ Card. The Boxes that are available are Viking Card Reader/Writer Box, PES2 Reader/Writer, Amazing Designs or Magic Box Reader/Writer to name a few. Today's boxes use USB ports. If you buy Embroidery Software, some higher end brands such as Viking require a Security device called a USB Dongle to run the software. if you lose the dongle, you lose your investment in the software. NO Dongle=Embroidery Program won't run and the Manuafacturer won't help you. So, never lose the dongle and if you buy used software, if there is no dongle, then you've lost your money. Embroidery software often costs over $1000. The Reader/Writer boxes cost about $300. Try Allbrands.com for Amazing Box.

Answer 2

If you have a 4 inch field, most likely you have a .pes format. Check with the manual that comes with your machine and it will tell you for sure what the format is. There are all kinds of embroidery companies with wonderful designs. www.marthapullen.com has an internet embroidery club....there is Cactus punch, Zundt, Nancy Zieman and many, many others. There is also www.embroideryonline.com. Also, if you go to a reputable dealer, you can purchase the designs on disks to fit in your machine. The dealer can help you with the format. Have fun!

Answer 3

designs embroidery

http://www.ebay.com/sch/linway/m.html?_nkw=&_armrs=1&_ipg=&_from=

http://sellmake.com/index.php?route=common/home#.UyG_8j95O1M