The only door lock that seems to work is the driver side door. It locks and unlocks. But the other three doors don't unlock, just lock. And I noticed that the manual says that when the car is in gear that t he doors are suppose to lock and in mine they don't. Any ideas?
2006-06-21 09:25:48 · 4 answers · asked by f350lariat 3 in Cars & Transportation ➔ Car Makes ➔ Chrysler
You have a wiring problem somewhere in the power door lock system. I know, no kidding, right?. You're going to have to take it to a shop with a wiring diagram and let them do some voltage testing. As just a pure guess, the passenger door switch is bad, or has a broken wire. I wish I could give you a definite answer, but with electrical problems, a lot of things are possible, and you just have to eliminate known good circuits until you find the problem. As far as the "Automatic Door Locks", they are called Rolling door locks, and do not activate until the vehicle is going 15 MPH. If they don't work, they probably have been put in the "Disabled" mode. Someone with a scan tool that can access the body computer can "Enable" the locks. HTH!! Good Luck!!
2006-06-24 14:21:20 · answer #1 · answered by lugnutz59 5 · 1⤊ 1⤋
touch the broking, perchance there's a manner of turning off this selection which you do no longer comprehend approximately. except it unlocks while it stops i could truly no longer have that decision, it feels like a discomfort interior the butt to ought to unencumber the door so which you will get out.
2016-10-31 06:18:16 · answer #2 · answered by ? 4 · 0⤊ 0⤋
most likely the driver's master switch, for the windows and locks. internal short.
2006-06-24 07:00:08 · answer #3 · answered by addy's gruve 2 · 0⤊ 0⤋
check yours fuses...that's what was wrong with mine
if not...take your door panel off(driver side) and make sure your adapter is plugged in....
2006-06-21 17:44:23 · answer #4 · answered by william h 1 · 0⤊ 0⤋