2006-06-20 06:40:17 · 4 answers · asked by blcgull 1 in Cars & Transportation ➔ Maintenance & Repairs
Really depends on what your trying to do, Big axe works if your not putting it together again. Hire a compressor and an air impact wrench with six point impact sockets, make sure you get metric
2006-06-20 06:47:50 · answer #1 · answered by 1crazypj 5 · 0⤊ 0⤋
a great deal. I easily have a pair air effect wrenches, a 275 ft-lb and a 500 ft-lb. I were given the 5 hundred only for eliminating crank bolts, and after I did the single on my daughter's 1993 Accord (to modify the timing belt) I had to positioned the regulator precise on the device to verify sufficient rigidity to get the bolt loose. It got here loose after about ten seconds of that. the first source has a good write-up on the themes. EDIT - do no longer try THE STARTER TRICK! The engine turns backward (CCW).
2016-11-15 00:48:24 · answer #2 · answered by faw 4 · 0⤊ 0⤋
try auto zones repair manual here is site to go to. http://www.autozone.com/servlet/UiBroker?UseCase=RG001&UserAction=beginRepairGuide
select what yu want to do when you get a picture in the instructions just click on the picture to enlarge.
2006-06-20 08:52:11 · answer #3 · answered by retired_afmil 6 · 0⤊ 0⤋
remove it
2006-06-20 06:45:07 · answer #4 · answered by maureen h 2 · 0⤊ 0⤋